{"title":"Frame Plugs \u0026 Caps","description":null,"products":[{"product_id":"frame-hole-caps-for-cfmoto-800mt-700mt-2021-to-2025","title":"Frame Hole Caps For CFMOTO 800MT \/ 700MT - 2021 to 2025","description":"\u003cdiv class=\"pd pd--epp\"\u003e\n  \u003ch2\u003eFrame Hole Caps For CFMOTO 800MT \/ 700MT - 2021 to 2025\u003c\/h2\u003e\n  \u003cp\u003eThese \u003cstrong\u003eframe hole caps\u003c\/strong\u003e are designed to cover the \u003cstrong\u003eopen mounting holes\u003c\/strong\u003e in the \u003cstrong\u003erear frame\u003c\/strong\u003e of the \u003cstrong\u003eCFMOTO 800MT\u003c\/strong\u003e and \u003cstrong\u003eCFMOTO 700MT\u003c\/strong\u003e. Left uncovered from the factory, these openings can collect road debris, moisture, and dirt over time. Each cap snaps directly into the existing hole without any tools or modifications, keeping the frame tidy and protected.\u003c\/p\u003e\n  \u003cp\u003eMade from plastic, each cap sits flush with the surrounding frame surface for a clean, factory-finished appearance. The set includes four caps to cover all available openings at the rear of the frame.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole caps block road debris, water, and grime from entering the open \u003cstrong\u003emounting holes in the rear frame\u003c\/strong\u003e, helping to prevent corrosion at contact points over time.\u003c\/p\u003e\n  \u003cp\u003eInstalling all four caps takes only a few minutes and requires no tools. Each cap snaps securely into place and holds without risk of rattling loose during normal riding.\u003c\/p\u003e\n  \u003cp\u003eWith the holes covered, the rear section of the CFMOTO 800MT and 700MT presents a cleaner, more finished look — particularly noticeable when the bike is ridden without saddlebags or luggage mounted.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003ePlug \u0026amp; Play.\u003c\/strong\u003e No drilling, no cutting, no permanent modification to your car.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eClean the area around each frame hole to remove any dirt or moisture.\u003c\/li\u003e\n    \u003cli\u003eAlign a cap with the corresponding hole in the rear frame.\u003c\/li\u003e\n    \u003cli\u003ePress firmly until the cap snaps fully into place.\u003c\/li\u003e\n    \u003cli\u003eRepeat for all four holes.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003ch2\u003eCompatibility\u003c\/h2\u003e\n  \u003ctable class=\"pd-compat\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eCFMOTO\u003c\/td\u003e\n        \u003ctd\u003e800MT\u003c\/td\u003e\n\u003ctd\u003e2021–2025\u003c\/td\u003e      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eCFMOTO\u003c\/td\u003e\n        \u003ctd\u003e700MT\u003c\/td\u003e\n\u003ctd\u003e2025+\u003c\/td\u003e      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n  \u003cp class=\"pd-compat-note\"\u003ePlease double-check your model year and trim before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eAvailable options\u003c\/h2\u003e\n  \u003cul class=\"pd-options\"\u003e\n    \u003cli\u003eBlack\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and this product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58716353134973,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_0c2d104d-13c1-44c9-9da8-3957181a3305.webp?v=1790021064"},{"product_id":"frame-hole-caps-for-bmw-r1200gs-r1250gs-lc-2014-to-2021","title":"Frame Hole Caps For BMW R1200GS \/ R1250GS LC - 2014 to 2021","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Caps For BMW R1200GS \/ R1250GS LC - 2014 to 2021\u003c\/h2\u003e\n  \u003cp\u003eThese \u003cstrong\u003eframe hole caps\u003c\/strong\u003e are designed to plug the unused openings in the tubular steel frame of the \u003cstrong\u003eBMW R1200GS\u003c\/strong\u003e LC and \u003cstrong\u003eBMW R1250GS\u003c\/strong\u003e LC. Left exposed from the factory, these holes collect dirt, moisture, and road debris over time. The \u003cstrong\u003eplastic frame plugs\u003c\/strong\u003e press firmly into each opening and sit flush with the frame tubes, keeping the chassis clean and protected against corrosion — effective \u003cstrong\u003eframe protection\u003c\/strong\u003e at minimal cost.\u003c\/p\u003e\n  \u003cp\u003eFinished in black, the caps blend naturally with the frame and require no adhesives or hardware to install. They are compatible with both the standard and \u003cstrong\u003eLC Adventure\u003c\/strong\u003e variants of the R1200GS (2014–2019) and R1250GS (2019–2021). Each cap is \u003cstrong\u003epress-fit\u003c\/strong\u003e into place, making installation fully reversible.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole caps seal each unused frame opening against water ingress and dirt accumulation, reducing the risk of corrosion inside the frame tubes over time. This straightforward frame protection requires no modification to the motorcycle.\u003c\/p\u003e\n  \u003cp\u003eInstallation is simple: each plastic frame plug is press-fit directly into the existing hole with no drilling, no adhesive, and no special tools. The job takes only a few minutes and can be undone at any time without leaving a mark.\u003c\/p\u003e\n  \u003cp\u003eAt a glance, the flush-mounted black caps give the frame a cleaner, more finished appearance compared to bare open holes — a small detail that makes a noticeable difference up close on the BMW R1200GS LC Adventure and BMW R1250GS LC Adventure.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame hole and the surrounding area with a dry cloth to remove dirt and grease. Align each cap with the corresponding frame opening. Press each cap firmly into place until it seats flush with the frame tube. Inspect each cap to confirm it is fully seated and secure.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eBMW R1250GS LC\u003c\/strong\u003e (2019–2021) and \u003cstrong\u003eBMW R1200GS LC\u003c\/strong\u003e (2014–2019). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eDo these caps fit both the standard and Adventure versions of the R1200GS and R1250GS?\u003c\/h3\u003e\n  \u003cp\u003eYes. They are listed as compatible with the R1200GS LC and R1200GS LC Adventure (2014–2019) and the R1250GS LC and R1250GS LC Adventure (2019–2021).\u003c\/p\u003e\n  \u003ch3\u003eWhat is included in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe listing image depicts approximately 11 individual plugs, but verify the exact count in the product photos before purchasing.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eEvery order ships free, and your frame hole caps are covered by a 1-year warranty against defects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808404410749,"sku":null,"price":89.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_b65c137a-9067-487c-ad43-e03575d014a7.webp?v=1791024938"},{"product_id":"rear-frame-hole-caps-for-cfmoto-800mt-700mt-2021-to-2025","title":"Rear Frame Hole Caps For CFMOTO 800MT \/ 700MT - 2021 to 2025","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eRear Frame Hole Caps For CFMOTO 800MT \/ 700MT - 2021 to 2025\u003c\/h2\u003e\n  \u003cp\u003eWhen \u003cstrong\u003esaddlebag mounts\u003c\/strong\u003e or side bag supports are removed from the \u003cstrong\u003eCFMOTO 800MT\u003c\/strong\u003e or \u003cstrong\u003eCFMOTO 700MT\u003c\/strong\u003e, the rear frame is left with open mounting holes. These \u003cstrong\u003erear frame hole caps\u003c\/strong\u003e snap directly into those openings, keeping out road debris, moisture, and dust.\u003c\/p\u003e\n  \u003cp\u003eEach \u003cstrong\u003eplastic cap\u003c\/strong\u003e clicks into the frame without tools or hardware. The set of four covers all mounting points, restoring a clean finish to the \u003cstrong\u003erear subframe\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe caps seal the open \u003cstrong\u003eframe holes\u003c\/strong\u003e left behind when saddlebag mounts are not installed, preventing dirt and water from collecting inside the frame tubes. Four plastic caps are included, covering every mounting point on the rear subframe.\u003c\/p\u003e\n  \u003cp\u003eEach cap snaps into place using the existing hole — no drilling, no adhesive, no modification to the frame. Removal is equally straightforward if you decide to reinstate the saddlebag mounts later.\u003c\/p\u003e\n  \u003cp\u003eThe black finish matches the frame and surrounding bodywork on the CFMOTO 800MT and CFMOTO 700MT, keeping the rear section looking tidy whether the bike is ridden bare or with soft luggage attached.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame holes of any dirt or debris. Align each cap over a frame mounting hole. Press firmly until the cap clicks and seats flush with the frame surface. Repeat for all four holes.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eCFMOTO 800MT\u003c\/strong\u003e (2021–2025) and \u003cstrong\u003eCFMOTO 700MT\u003c\/strong\u003e (2025–2025). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWill these caps fit both the 800MT and the 700MT?\u003c\/h3\u003e\n  \u003cp\u003eYes — according to the listing, these caps are compatible with the CFMOTO 800MT (2021–2025) and the CFMOTO 700MT (2025).\u003c\/p\u003e\n  \u003ch3\u003eHow many caps come in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe set includes 4 caps, covering all rear frame mounting holes.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808410833277,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_35eb8a6a-543e-45dc-a1f1-53422427e285.webp?v=1791025043"},{"product_id":"frame-hole-cover-for-voge-ds800x-800ds-800ds-rally","title":"Frame Hole Cover For VOGE DS800X \/ 800DS \/ 800DS Rally - 2024 to 2027","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover For VOGE DS800X \/ 800DS \/ 800DS Rally\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eframe hole covers\u003c\/strong\u003e are purpose-made plugs that seal the unused openings left in the frame of the \u003cstrong\u003eVOGE DS800X\u003c\/strong\u003e, \u003cstrong\u003e800DS\u003c\/strong\u003e, and \u003cstrong\u003e800DS Rally\u003c\/strong\u003e. These holes are part of the factory frame design and are left exposed from the factory, allowing dirt, moisture, and road debris to enter and accumulate inside the frame tubes.\u003c\/p\u003e\n  \u003cp\u003eThe covers snap directly into the existing frame openings without any drilling or modification. Once installed, they present a clean, finished look while keeping the frame interior protected from corrosion and fouling.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole covers block moisture, mud, and road grit from entering the frame tubes — a common but often overlooked maintenance concern on dual-sport and adventure bikes used in mixed conditions. Keeping water out of the frame reduces the risk of internal corrosion over time.\u003c\/p\u003e\n  \u003cp\u003eMade from \u003cstrong\u003eplastic\u003c\/strong\u003e, the covers snap into place using the existing hole diameter, requiring no tools and no permanent changes to the motorcycle. Removal is equally straightforward if access to the frame interior is ever needed.\u003c\/p\u003e\n  \u003cp\u003eFinished in black, the covers blend with the \u003cstrong\u003eDS800X\u003c\/strong\u003e and 800DS Rally frame finish, replacing the raw, open-hole appearance with a tidy factory-style look.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole openings with a dry cloth to remove any dirt or debris. Align each cover with the corresponding frame hole. Press firmly until the cover snaps flush and seats securely. No tools required.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eVOGE DS800X\u003c\/strong\u003e, \u003cstrong\u003eVOGE 800DS\u003c\/strong\u003e and \u003cstrong\u003eVOGE 800DS Rally\u003c\/strong\u003e. Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eHow many covers are included in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe exact piece count is not specified in the listing — please check the product images or contact us before ordering.\u003c\/p\u003e\n  \u003ch3\u003eDo these require any drilling or modification to install?\u003c\/h3\u003e\n  \u003cp\u003eNo. The covers snap directly into the existing frame openings with no drilling or permanent modification required.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every frame hole cover set is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808415650173,"sku":null,"price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_03_974e9b47-73b3-42b1-9750-b27ca07b42cc.webp?v=1791025150"},{"product_id":"frame-hole-cover-caps-for-suzuki-gsx-s1000-gsx-s1000gt-2015-to-2022","title":"Frame Hole Cover Caps For Suzuki GSX-S1000 \/ GSX-S1000GT - 2015 to 2022","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover Caps For Suzuki GSX-S1000 \/ GSX-S1000GT - 2015 to 2022\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e fill the exposed openings left in the chassis of the Suzuki \u003cstrong\u003eGSX-S1000\u003c\/strong\u003e, \u003cstrong\u003eGSX-S1000F\u003c\/strong\u003e, and \u003cstrong\u003eGSX-S1000GT\u003c\/strong\u003e. These open ports are a factory feature of the frame design but attract dirt, moisture, and road debris over time. Capping them keeps the inner frame surface clean and gives the chassis a finished appearance.\u003c\/p\u003e\n  \u003cp\u003eMade from \u003cstrong\u003eABS plastic\u003c\/strong\u003e, the caps press into the existing holes without any drilling or permanent modification. Two caps are included per set, covering both sides of the frame in one purchase. Available in a \u003cstrong\u003eGSX-S logo\u003c\/strong\u003e version or a plain no-logo finish.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe ABS plastic construction resists the minor impacts and vibration typical of everyday street riding. The material holds its shape in the heat range produced by the GSX-S1000 engine and does not crack or distort under normal conditions.\u003c\/p\u003e\n  \u003cp\u003eSealing the \u003cstrong\u003eframe holes\u003c\/strong\u003e reduces the entry of road grime and water into the chassis cavity. This is particularly relevant on bikes ridden in wet conditions or on roads with heavy salt or debris.\u003c\/p\u003e\n  \u003cp\u003eThe press-fit design means installation takes under a minute and requires no tools. The frame hole cover caps seat firmly in the OEM hole and stay in place without adhesive or hardware.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole opening and surrounding area with a dry cloth to remove any dirt or grease. Align the cap over the hole, ensuring the lip is seated evenly around the perimeter. Press the cap firmly into the hole until it clicks or sits flush with the frame surface. Repeat for the second cap on the opposite side of the frame.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eGSX-S Logo\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eSuzuki GSX-S1000\u003c\/strong\u003e (2015–2020), \u003cstrong\u003eSuzuki GSX-S1000F\u003c\/strong\u003e (2015–2022) and \u003cstrong\u003eSuzuki GSX-S1000GT\u003c\/strong\u003e (2021–2022). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eDoes this set cover both sides of the frame?\u003c\/h3\u003e\n  \u003cp\u003eYes, each set includes 2 caps, one for each side of the frame.\u003c\/p\u003e\n  \u003ch3\u003eDo I need any tools to install these caps?\u003c\/h3\u003e\n  \u003cp\u003eNo tools are required — the caps press directly into the existing frame holes with no drilling or modification.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eEvery order ships free and is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808425644413,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_6cea31a3-4691-4dda-980e-f6c754065cd5.webp?v=1791025347"},{"product_id":"frame-end-caps-for-suzuki-gsx-8r-2024-to-2025","title":"Frame End Caps For Suzuki GSX-8R - 2024 to 2025","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame End Caps For Suzuki GSX-8R - 2024 to 2025\u003c\/h2\u003e\n  \u003cp\u003eThese \u003cstrong\u003eframe end caps\u003c\/strong\u003e are designed specifically for the \u003cstrong\u003eSuzuki GSX-8R\u003c\/strong\u003e (2024-2025). They cover the open \u003cstrong\u003eframe holes\u003c\/strong\u003e left exposed from the factory, giving the chassis a finished appearance rather than bare or unfinished openings. Each cap is a simple \u003cstrong\u003eframe plug\u003c\/strong\u003e that presses into place with no tools required.\u003c\/p\u003e\n  \u003cp\u003eAvailable in two versions — with an embossed \u003cstrong\u003e8R logo\u003c\/strong\u003e or plain — they offer a \u003cstrong\u003eplug-in fit\u003c\/strong\u003e with no drilling and no permanent modification to the bike.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame end caps seal open frame holes against moisture and debris, helping to keep the interior of the frame tubes clean over time. This is especially relevant on a bike ridden in varied conditions.\u003c\/p\u003e\n  \u003cp\u003eThe With Logo variant features the 8R emblem, matching the bike's own branding and adding a detail that looks factory rather than aftermarket. The No Logo variant blends in for riders who prefer a cleaner, understated finish.\u003c\/p\u003e\n  \u003cp\u003eInstallation is straightforward: each frame plug presses directly into its hole and holds securely, making them easy to fit during a routine wash or prep session without any special tools.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole openings and make sure they are dry and free of debris. Align each cap over its corresponding frame hole. Press firmly until the cap seats flush with the frame surface. Verify each cap is secure before riding.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eWith Logo\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eSuzuki GSX-8R\u003c\/strong\u003e (2024–2025). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWill these caps fit both the 2024 and 2025 GSX-8R?\u003c\/h3\u003e\n  \u003cp\u003eYes, these frame end caps are listed as compatible with the Suzuki GSX-8R for model years 2024 and 2025.\u003c\/p\u003e\n  \u003ch3\u003eWhat is the difference between the With Logo and No Logo versions?\u003c\/h3\u003e\n  \u003cp\u003eThe With Logo variant features an embossed 8R emblem on the cap face; the No Logo version is plain black for a more subtle finish. Both press into the frame holes the same way.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808435442045,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_8b4d1664-268c-41ac-b016-220ae723964c.webp?v=1791121000"},{"product_id":"frame-hole-cover-plugs-for-bmw-s1000xr-2013-to-2022","title":"Frame Hole Cover Plugs For BMW S1000XR - 2013 to 2022","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eThe factory frame on the \u003cstrong\u003eBMW S1000XR\u003c\/strong\u003e leaves several openings in the chassis that collect road debris, moisture, and grime over time.\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003eframe hole cover plugs\u003c\/strong\u003e press directly into those openings, sealing them without any tools or drilling. This simple \u003cstrong\u003eframe protection\u003c\/strong\u003e measure takes only minutes and requires no permanent modification.\u003c\/p\u003e\n\u003cp\u003eThe set includes 8 plugs sized to match the \u003cstrong\u003eS1000XR frame\u003c\/strong\u003e. Available in a plain black finish or with an embossed S1000XR logo, both versions are molded in \u003cstrong\u003eABS plastic\u003c\/strong\u003e and finished in black to blend with the chassis.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eThese frame hole cover plugs block road grit and water from entering the \u003cstrong\u003echassis openings\u003c\/strong\u003e, reducing the long-term risk of corrosion inside the frame tubes. The \u003cstrong\u003epress-fit\u003c\/strong\u003e design means installation takes only a few minutes with no tools required.\u003c\/p\u003e\n\u003cp\u003eThe ABS plastic construction resists impact and road chemicals without adding meaningful weight. Once seated, the plugs sit flush with the frame surface and do not rattle or shift under vibration.\u003c\/p\u003e\n\u003cp\u003eChoosing the S1000XR logo variant adds a subtle branded detail to the lower frame area, while the no-logo option keeps the look clean and understated. Both versions deliver the same fit and protection.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame opening with a dry cloth to remove dirt and moisture. Select the correct plug size for each opening — the set of 8 covers all exposed holes on the S1000XR frame. Press each plug firmly into its opening by hand until it seats flush with the frame surface. Inspect each plug to confirm it is fully seated and does not protrude.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eWith S1000XR Logo\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eBMW S1000XR\u003c\/strong\u003e (2013–2022). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eDoes this kit cover all the frame openings on the S1000XR?\u003c\/h3\u003e\n\u003cp\u003eYes, the set includes 8 plugs sized to seal all exposed frame holes on the BMW S1000XR 2013-2022.\u003c\/p\u003e\n\u003ch3\u003eDo I need any tools to install these plugs?\u003c\/h3\u003e\n\u003cp\u003eNo tools are required — each plug presses into the frame opening by hand and seats flush without drilling or fasteners.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eYour order ships free, and every set is covered by a 1-year warranty against defects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808440815997,"sku":null,"price":49.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_03_e07176bb-c23b-4863-bdf6-b074075c7737.webp?v=1791025662"},{"product_id":"frame-hole-caps-for-yamaha-mt-09-mt-09-sp-2021-to-2025","title":"Frame Hole Caps For Yamaha MT-09 \/ MT-09 SP - 2021 to 2025","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Caps For Yamaha MT-09 \/ MT-09 SP - 2021 to 2025\u003c\/h2\u003e\n  \u003cp\u003eThe factory frame on the \u003cstrong\u003eYamaha MT-09\u003c\/strong\u003e and \u003cstrong\u003eMT-09 SP\u003c\/strong\u003e leaves a number of holes exposed along the chassis. Over time, those openings collect moisture, road grime, and debris that can accelerate corrosion at the frame welds. These \u003cstrong\u003eframe hole caps\u003c\/strong\u003e snap directly into the existing openings, sealing them without any tools or permanent modification.\u003c\/p\u003e\n  \u003cp\u003eMolded from \u003cstrong\u003eABS plastic\u003c\/strong\u003e in \u003cstrong\u003ematte black\u003c\/strong\u003e, the caps blend with the MT-09's dark-toned frame and engine area. The \u003cstrong\u003epress-fit\u003c\/strong\u003e design means installation takes only a few minutes and leaves no marks on the chassis if you ever choose to remove them.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThese frame hole caps seal the exposed cavities in the \u003cstrong\u003eMT-09 chassis\u003c\/strong\u003e, blocking moisture and road debris from settling inside the frame tubes. Keeping those areas dry reduces the risk of \u003cstrong\u003einternal corrosion\u003c\/strong\u003e over the life of the bike.\u003c\/p\u003e\n  \u003cp\u003eThe matte black ABS plastic finish matches the factory frame color on both the standard MT-09 and the MT-09 SP, giving the underside of the bike a cleaner, more finished appearance without any painting or modification.\u003c\/p\u003e\n  \u003cp\u003eBecause the caps use a simple press-fit retention, no tools are required for installation or removal. There is no drilling, no adhesive, and no risk of damage to the frame if you later need to access the openings.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame hole with a dry cloth to remove any dust or grease. Select the correct cap size for each opening — the set includes caps of different sizes to match the various holes on the frame. Press each cap firmly into its corresponding hole until it seats flush with the frame surface. Inspect each cap to confirm it is fully seated and flush before riding.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eFull Set\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eYamaha MT-09\u003c\/strong\u003e (2021–2025) and \u003cstrong\u003eYamaha MT-09 SP\u003c\/strong\u003e (2021–2025). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWill these caps fit both the standard MT-09 and the MT-09 SP?\u003c\/h3\u003e\n  \u003cp\u003eYes, the set is listed as compatible with both the MT-09 and the MT-09 SP for model years 2021 through 2025.\u003c\/p\u003e\n  \u003ch3\u003eWhat is included in the set and are any tools required?\u003c\/h3\u003e\n  \u003cp\u003eThe set includes multiple caps of varying sizes to cover the different frame holes on the MT-09 chassis; no tools are needed as each cap simply presses into place.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808457068925,"sku":null,"price":89.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/S8462d752cba1474b847f671e0c68c135G.avif?v=1791120673"},{"product_id":"frame-hole-cap-plugs-for-yamaha-tenere-700-xtz-700-2019-to-2021","title":"Frame Hole Cap Plugs For Yamaha Ténéré 700 \/ XTZ 700 - 2019 to 2027","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eFrame Hole Cap Plugs For Yamaha Ténéré 700 \/ XTZ 700 - 2019 to 2027\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003eframe hole cap plugs\u003c\/strong\u003e are designed to fill the unused mounting holes in the frame of the \u003cstrong\u003eYamaha Ténéré 700\u003c\/strong\u003e and \u003cstrong\u003eXTZ 700\u003c\/strong\u003e (2019–2027). Each cap snaps directly into the existing openings — a \u003cstrong\u003esnap-in installation\u003c\/strong\u003e that keeps dirt, moisture, and debris out of the frame without any drilling or permanent modification. The \u003cstrong\u003eset of 2 caps\u003c\/strong\u003e covers both sides of the frame.\u003c\/p\u003e\n\u003cp\u003eAvailable in two versions — plain or with a \u003cstrong\u003eTénéré 700 logo\u003c\/strong\u003e — they offer a clean, finished look at the \u003cstrong\u003eframe holes\u003c\/strong\u003e. Made from \u003cstrong\u003eplastic\u003c\/strong\u003e, each cap sits flush with the frame surface.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eThe frame hole cap plugs prevent debris and water ingress through the unused frame holes, which is particularly relevant on an adventure bike that sees off-road use. Sealing these openings reduces the chance of long-term corrosion inside the frame.\u003c\/p\u003e\n\u003cp\u003eThe snap-in design requires no tools and causes no permanent modification to the motorcycle. Installation takes a matter of seconds and the caps can be removed just as easily if needed.\u003c\/p\u003e\n\u003cp\u003eChoosing the Ténéré 700 logo variant adds a subtle branded detail to the frame, while the plain version keeps the look clean and understated. Both versions are made from plastic and sit flush with the frame surface.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame holes to remove any dust or debris. Align each cap with the corresponding frame hole. Press firmly until the cap snaps into place. No tools are required. Repeat for the second hole.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eNo Logo\u003c\/strong\u003e and \u003cstrong\u003eTénéré 700 Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eYamaha Ténéré 700\u003c\/strong\u003e (2019–2027). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eWill these fit both the Ténéré 700 and the XTZ 700?\u003c\/h3\u003e\n\u003cp\u003eYes, the caps are listed for both the Yamaha Ténéré 700 and the XTZ 700 for model years 2019 through 2027.\u003c\/p\u003e\n\u003ch3\u003eHow many caps come in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set includes 2 caps. They snap directly into the frame holes with no tools required.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eYour order ships free, and every set of frame hole cap plugs is covered by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808462180733,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_02_dbfbdc63-79b4-4ec8-ba66-3bb2c7afe460.webp?v=1791025889"},{"product_id":"frame-hole-caps-for-kawasaki-zx-4r-zx-4rr-zx-6r","title":"Frame Hole Caps For Kawasaki ZX-4R \/ ZX-4RR \/ ZX-6R - 2010 to 2027","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Caps For Kawasaki ZX-4R \/ ZX-4RR \/ ZX-6R\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eplastic frame caps\u003c\/strong\u003e for the \u003cstrong\u003eKawasaki ZX-4R\u003c\/strong\u003e, \u003cstrong\u003eKawasaki ZX-4RR\u003c\/strong\u003e, and \u003cstrong\u003eKawasaki ZX-6R\u003c\/strong\u003e are designed to fill the open mounting holes left in the frame, giving the chassis a finished, intentional look. Each cap features a \u003cstrong\u003esnap-in fit\u003c\/strong\u003e that seats directly into the existing opening without any drilling or permanent modification.\u003c\/p\u003e\n  \u003cp\u003eAvailable in versions with a model-specific \u003cstrong\u003eengraved logo\u003c\/strong\u003e or a clean no-logo finish, these \u003cstrong\u003eframe hole caps\u003c\/strong\u003e let you tailor the look of your Ninja to your preference. The black plastic construction blends with the factory frame finish.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThese plastic frame caps cover exposed frame openings that are otherwise left bare from the factory. Filling those holes keeps debris and moisture out of the frame cavity, which helps maintain a cleaner chassis over time.\u003c\/p\u003e\n  \u003cp\u003eThe snap-in fit means installation takes seconds and requires no tools or modifications. The caps can be removed just as easily if you need to access the frame openings later.\u003c\/p\u003e\n  \u003cp\u003eWith both logo-engraved and plain no-logo options, you can match the cap style to your build — whether you want to reinforce the Kawasaki ZX-4R, Kawasaki ZX-4RR, or Kawasaki ZX-6R branding, or keep the frame line subtle and uncluttered.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole and the surrounding area to remove any dirt or debris. Align the cap over the frame hole, ensuring the retaining ring lines up with the opening. Press firmly until the cap snaps into place flush with the frame surface.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack – ZX-4R logo\u003c\/strong\u003e, \u003cstrong\u003eBlack – ZX-4RR logo\u003c\/strong\u003e, \u003cstrong\u003eBlack – ZX-6R logo\u003c\/strong\u003e, \u003cstrong\u003eBlack – ZX-4R, no logo\u003c\/strong\u003e, \u003cstrong\u003eBlack – ZX-4RR, no logo\u003c\/strong\u003e and \u003cstrong\u003eBlack – ZX-6R, no logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eKawasaki ZX-4R\u003c\/strong\u003e, \u003cstrong\u003eKawasaki ZX-4RR\u003c\/strong\u003e and \u003cstrong\u003eKawasaki ZX-6R\u003c\/strong\u003e. Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWill these caps fit both the ZX-4R and the ZX-6R?\u003c\/h3\u003e\n  \u003cp\u003eYes — separate variants are available for the ZX-4R, ZX-4RR, and ZX-6R. Select the correct model when ordering to get the matching engraved logo, or choose the no-logo option.\u003c\/p\u003e\n  \u003ch3\u003eWhat is included in the set?\u003c\/h3\u003e\n  \u003cp\u003eEach order includes 2 frame hole caps for the specified model.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808468570493,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_05_9bab76cd-f517-4421-8e7e-324ac77b7fe7.webp?v=1791026026"},{"product_id":"frame-hole-plugs-for-kawasaki-versys-1000-z1000-sx-ninja-1000","title":"Frame Hole Plugs For Kawasaki Versys 1000 \/ Z1000 SX \/ Ninja 1000 - 2010 to 2027","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eThese \u003cstrong\u003eframe hole plugs\u003c\/strong\u003e are designed to cover the exposed mounting holes left in the frame of the \u003cstrong\u003eKawasaki Versys 1000\u003c\/strong\u003e, \u003cstrong\u003eZ1000 SX\u003c\/strong\u003e, and \u003cstrong\u003eNinja 1000\u003c\/strong\u003e.\u003c\/h2\u003e\n\u003cp\u003eMade from \u003cstrong\u003eABS plastic\u003c\/strong\u003e, each plug presses directly into the \u003cstrong\u003eframe opening\u003c\/strong\u003e without tools, drilling, or adhesive.\u003c\/p\u003e\n\u003cp\u003eThe set of 2 black plugs gives the frame a finished appearance and keeps moisture and debris out of open cavities. They weigh just 0.03 kg combined and are straightforward to fit or remove at any time.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eThese frame hole plugs seal open cavities in the Kawasaki Versys 1000, Z1000 SX, and Ninja 1000 frame, preventing dirt, water, and road debris from collecting inside. Keeping those openings closed helps protect the surrounding area from long-term corrosion and buildup.\u003c\/p\u003e\n\u003cp\u003eThe ABS plastic plugs press firmly into place with no tools and \u003cstrong\u003eno permanent modification\u003c\/strong\u003e required. Each plug snaps securely into the frame opening and can be removed just as easily, making them a practical addition for riders who want a cleaner look without committing to irreversible changes.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole opening and remove any debris or moisture. Align the plug over the frame hole. Press the plug firmly until it snaps into place. No tools required. Repeat for the second hole.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eKawasaki Versys 1000\u003c\/strong\u003e, \u003cstrong\u003eKawasaki Z1000 SX\u003c\/strong\u003e and \u003cstrong\u003eKawasaki Ninja 1000\u003c\/strong\u003e. Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eHow many plugs come in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set includes 2 frame hole plugs.\u003c\/p\u003e\n\u003ch3\u003eDo these require any tools or drilling to install?\u003c\/h3\u003e\n\u003cp\u003eNo — the plugs press directly into the frame holes and snap into place without tools or drilling.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808474009981,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_84cac8c6-b79b-4b2c-94cf-24f0529a768e.webp?v=1791026131"},{"product_id":"frame-hole-end-caps-for-ducati-desert-x-2022-to-2023","title":"Frame Hole End Caps For Ducati Desert X - 2022 to 2023","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eThese \u003cstrong\u003eframe hole end caps\u003c\/strong\u003e are designed to plug the open tube ends on the \u003cstrong\u003eDucati Desert X\u003c\/strong\u003e frame.\u003c\/h2\u003e\n\u003cp\u003eThey prevent moisture, dirt, and road debris from entering the hollow frame tubes, keeping the structure clean inside.\u003c\/p\u003e\n\u003cp\u003eTwo finish options are available: one features the \u003cstrong\u003eDesertX logo\u003c\/strong\u003e for a factory-matched look, the other is plain black for a clean, understated appearance. Both are made from \u003cstrong\u003eplastic\u003c\/strong\u003e and press directly into the frame openings.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eframe end caps\u003c\/strong\u003e seal open cavities in the \u003cstrong\u003eDesert X chassis\u003c\/strong\u003e, blocking water and grit that would otherwise accumulate inside the tubes over time. This is a simple but effective measure for riders of the Ducati Desert X who cover mixed terrain.\u003c\/p\u003e\n\u003cp\u003eInstallation requires no tools. Each cap presses firmly into its corresponding frame hole and seats securely without drilling or modification. The set can be installed in minutes and removed just as easily if needed.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole openings to remove any dust or grease. Align each cap with its corresponding frame tube opening. Press each cap firmly into place until it seats flush with the frame surface. Check that all caps are fully seated and secure before riding.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eDesertX Logo\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eDucati Desert X\u003c\/strong\u003e (2022–2023). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe listing shows a set of 4 caps sized to fit the frame tube openings on the Ducati Desert X.\u003c\/p\u003e\n\u003ch3\u003eDo these require any tools or drilling to install?\u003c\/h3\u003e\n\u003cp\u003eNo — each cap is a press-fit design that seats directly into the frame hole without tools or permanent modification.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eYour order ships free, and every set of frame end caps is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808476303741,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_f1fb3ff2-91c9-4514-9c4a-6f7c602baf9a.webp?v=1791120063"},{"product_id":"frame-hole-cover-caps-for-kawasaki-z900-2017-to-2022","title":"Frame Hole Cover Caps For Kawasaki Z900 - 2017 to 2022","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eThe \u003cstrong\u003eKawasaki Z900\u003c\/strong\u003e frame is drilled with several unused mounting holes that are left exposed from the factory.\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e snap directly into those openings, sealing them against dirt, moisture, and road debris.\u003c\/p\u003e\n\u003cp\u003eThe set includes four \u003cstrong\u003eplastic plugs\u003c\/strong\u003e in two sizes to cover all standard \u003cstrong\u003eframe openings\u003c\/strong\u003e. Available in a Z900-logoed version or a plain no-logo finish depending on your preference.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eExposed frame holes collect water and grime over time, which can accelerate corrosion on the inner frame walls. These frame hole cover caps create a clean seal that keeps the interior of the \u003cstrong\u003eframe tube\u003c\/strong\u003e dry and clean, providing effective \u003cstrong\u003eframe protection\u003c\/strong\u003e against the elements.\u003c\/p\u003e\n\u003cp\u003eInstallation requires no tools and no drilling. Each plug presses directly into its respective frame opening and holds securely in place, making this one of the simplest upgrades you can make to the \u003cstrong\u003eZ900 2017-2022\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe caps also give the frame a finished appearance, eliminating the raw, unfinished look of the open holes. The no-logo variant integrates cleanly with any custom color scheme, while the Z900-logoed option adds a subtle branded detail.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame openings thoroughly and allow them to dry. Select the correct cap size for each hole. Press each cap firmly into its frame opening until it seats flush. Inspect each cap to confirm it is fully seated and secure.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eZ900 (with logo)\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eKawasaki Z900\u003c\/strong\u003e (2017–2022). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set includes 4 frame hole cover caps in two sizes to fit the standard factory openings on the Z900.\u003c\/p\u003e\n\u003ch3\u003eDo these require any tools or drilling to install?\u003c\/h3\u003e\n\u003cp\u003eNo tools or drilling are needed — each cap presses directly into the factory frame opening by hand.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set is backed by a 1-year warranty against defects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808482988413,"sku":null,"price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/z900_kawasaki.jpg?v=1791119631"},{"product_id":"frame-hole-caps-for-ducati-panigale-v2","title":"Frame Hole Caps For Ducati Panigale V2 - 2020 to 2027","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Caps For Ducati Panigale V2\u003c\/h2\u003e\n  \u003cp\u003eThese \u003cstrong\u003eframe hole caps\u003c\/strong\u003e are designed to fill the exposed mounting holes in the frame of the \u003cstrong\u003eDucati Panigale V2\u003c\/strong\u003e. Left uncovered, those openings collect road grime, moisture, and debris that can work their way into the frame over time. Each cap is a simple \u003cstrong\u003epress-fit plug\u003c\/strong\u003e that seats flush with the surrounding bodywork for a clean, factory-finished look.\u003c\/p\u003e\n  \u003cp\u003eThe kit includes a \u003cstrong\u003eset of 2 caps\u003c\/strong\u003e, available in black \u003cstrong\u003eABS plastic\u003c\/strong\u003e with or without a logo detail, both matched to the stock finish of the Panigale V2 frame.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole caps block dirt, water, and road debris from entering the open cavities in the Panigale V2 frame. This helps keep the frame interior clean and prevents long-term corrosion caused by trapped moisture.\u003c\/p\u003e\n  \u003cp\u003eInstallation requires no tools and no drilling. Each cap is a \u003cstrong\u003eframe plug\u003c\/strong\u003e that presses directly into its designated hole and holds securely without any hardware. The finished result looks intentional, with no visible gaps or raw edges.\u003c\/p\u003e\n  \u003cp\u003eThe two available versions let you choose between a plain matte-black finish or one with a subtle logo detail. Either way, the caps match the stock color of the frame and do not draw attention away from the bike's overall line.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole opening with a dry cloth to remove any dirt or grease. Align the cap over the opening, tab side facing the hole. Press the cap firmly until it seats flush with the surrounding surface. Repeat for the second hole.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack with Logo\u003c\/strong\u003e and \u003cstrong\u003eBlack without Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eDucati Panigale V2\u003c\/strong\u003e. Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eDoes this kit include caps for both sides of the bike?\u003c\/h3\u003e\n  \u003cp\u003eYes, the kit includes a set of 2 caps to cover both frame holes on the Panigale V2.\u003c\/p\u003e\n  \u003ch3\u003eDo I need any tools to install these caps?\u003c\/h3\u003e\n  \u003cp\u003eNo tools are required — each cap is a frame plug that presses directly into the hole and holds without hardware.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808489181565,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_02_2ec5d02c-7383-4d84-b89c-9d87960865d8.webp?v=1791026647"},{"product_id":"frame-hole-cover-cap-set-for-honda-cbr1000rr-2021-to-2023","title":"Frame Hole Cover Cap Set For Honda CBR1000RR - 2021 to 2023","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover Cap Set For Honda CBR1000RR - 2021 to 2023\u003c\/h2\u003e\n  \u003cp\u003eThese \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are designed to fill the open mounting points and unused ports on the \u003cstrong\u003eHonda CBR1000RR\u003c\/strong\u003e frame. Left exposed from the factory, these holes can collect debris and water, and they interrupt the clean lines of the fairing.\u003c\/p\u003e\n  \u003cp\u003eMade from plastic, each cap snaps into place without tools or permanent modification. The set covers multiple \u003cstrong\u003eframe openings\u003c\/strong\u003e for a finished appearance on both sides of the bike.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole cover caps eliminate the unsightly gaps that remain in the \u003cstrong\u003eCBR1000RR frame\u003c\/strong\u003e after assembly. Covering these openings keeps dirt and moisture out of the frame tubes and mounting cavities, which matters on a bike used in varied conditions.\u003c\/p\u003e\n  \u003cp\u003eInstallation requires \u003cstrong\u003eno drilling\u003c\/strong\u003e and no adhesive. Each \u003cstrong\u003eplastic cap\u003c\/strong\u003e presses directly into its corresponding hole using the factory opening as the mounting point, leaving no trace if removed. Three style options let you match the finish to your preference.\u003c\/p\u003e\n  \u003cp\u003eAvailable in Style A, Style B, and a no-logo version, giving you a subtle way to personalize the look of the frame without committing to a permanent change.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame holes of any dirt or debris before fitting. Select the correct cap size for each opening on the frame. Align the cap with the hole and press firmly until it seats flush. Repeat for each remaining frame opening in the set.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eNo Logo\u003c\/strong\u003e, \u003cstrong\u003eStyle B\u003c\/strong\u003e and \u003cstrong\u003eStyle A\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eHonda CBR1000RR\u003c\/strong\u003e (2021–2023). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWill these caps fit the CBR1000RR SP as well as the standard model?\u003c\/h3\u003e\n  \u003cp\u003eThe listing specifies fitment for the Honda CBR1000RR 2021-2023; confirm SP compatibility before ordering as it is not explicitly stated by the seller.\u003c\/p\u003e\n  \u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe exact count per set is not specified by the seller — please check the product images or contact us before ordering.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eEvery order ships free, and the frame hole cover caps are covered by a 1-year warranty against defects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808493834621,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_7fe3a41f-f63e-46c0-8c6d-5dc07cf13b7d.webp?v=1791026759"},{"product_id":"frame-hole-caps-for-honda-cb1000r-2018-to-2022","title":"Frame Hole Caps For Honda CB1000R - 2008 to 2022","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eFrame Hole Caps For Honda CB1000R - 2008 to 2022\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003eframe hole caps\u003c\/strong\u003e are designed to fill the \u003cstrong\u003eexposed frame holes\u003c\/strong\u003e left in the frame of the \u003cstrong\u003eHonda CB1000R\u003c\/strong\u003e. Made from \u003cstrong\u003eABS plastic\u003c\/strong\u003e, they press into place without any drilling or permanent modification, giving the frame a cleaner, finished appearance straight out of the box.\u003c\/p\u003e\n\u003cp\u003eTwo variants are available: one featuring an engraved \u003cstrong\u003eCB1000R logo\u003c\/strong\u003e and one plain black cap for a more understated look. Both are finished in black to match the CB1000R's factory frame color.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eThe frame hole caps cover unused \u003cstrong\u003eframe hole openings\u003c\/strong\u003e that would otherwise collect dirt, moisture, and road debris. Keeping those cavities sealed reduces the risk of corrosion building up inside the frame over time.\u003c\/p\u003e\n\u003cp\u003eThe engraved CB1000R logo variant adds a subtle model-specific detail that complements the bike's existing badging. The no-logo option suits riders who prefer a cleaner, stealth aesthetic.\u003c\/p\u003e\n\u003cp\u003eInstallation requires no tools and no permanent modification. Each cap presses directly into the frame hole and holds securely without adhesive or fasteners.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole opening and remove any dirt or debris. Align the cap with the frame hole. Press the cap firmly into the hole until it seats flush with the surrounding frame surface. Repeat for each remaining hole.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eBlack – CB1000R Logo\u003c\/strong\u003e and \u003cstrong\u003eBlack – No Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eHonda CB1000R\u003c\/strong\u003e (2008–2022). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eWill these caps fit my 2022 CB1000R?\u003c\/h3\u003e\n\u003cp\u003eYes, these frame hole caps are listed as compatible with the Honda CB1000R for model years 2008 through 2022.\u003c\/p\u003e\n\u003ch3\u003eDo I need any tools to install them?\u003c\/h3\u003e\n\u003cp\u003eNo tools are required. Each cap presses directly into the frame hole without drilling or fasteners.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eYour order ships free, and every set of frame hole caps is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"2008 to 2014","offer_id":58815612682621,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true},{"title":"2018 to 2022","offer_id":58815612715389,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_02_1f3af7fa-dfa0-4d70-b560-1783a82186ea.webp?v=1791109273"},{"product_id":"frame-hole-cover-caps-for-honda-transalp-xl750-2023-to-2023","title":"Frame Hole Cover Caps For Honda Transalp XL750 - 2023 to 2027","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eFrame Hole Cover Caps For Honda Transalp XL750 - 2023 to 2027\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are designed specifically for the \u003cstrong\u003eHonda Transalp XL750\u003c\/strong\u003e (2023 and later). They press into the open frame tubes left exposed from the factory, giving the chassis a cleaner, finished appearance.\u003c\/p\u003e\n\u003cp\u003eAvailable in two versions — with a Transalp logo or plain — both caps snap into place without any tools or modifications. The \u003cstrong\u003eplastic construction\u003c\/strong\u003e keeps weight negligible while sealing the \u003cstrong\u003eframe opening\u003c\/strong\u003es against dirt and moisture.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eThe frame hole cover caps block debris, water, and road grime from entering the open frame tubes on the Honda Transalp XL750. Keeping those cavities sealed helps protect the internal structure over time.\u003c\/p\u003e\n\u003cp\u003eInstallation takes seconds. Each cap presses directly into the existing frame opening with \u003cstrong\u003eno drilling\u003c\/strong\u003e, no adhesive, and no hardware required. Removal is equally straightforward if needed for service.\u003c\/p\u003e\n\u003cp\u003eThe logo variant adds a subtle branded touch to the frame area, while the plain version maintains a clean, understated look. Both options are finished in black to match the factory frame color.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame opening of any dirt or debris. Align the cap with the frame hole. Press the cap firmly into place until it seats flush. Repeat for the second cap.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eWith Transalp Logo\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eHonda Transalp XL750\u003c\/strong\u003e (2023+). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eWill these caps fit the Honda Transalp XL750 2023?\u003c\/h3\u003e\n\u003cp\u003eYes, these caps are designed specifically for the Honda Transalp XL750 2023 and later models.\u003c\/p\u003e\n\u003ch3\u003eDo I need any tools to install these frame caps?\u003c\/h3\u003e\n\u003cp\u003eNo tools are required — each cap presses directly into the frame hole and seats flush without drilling or hardware.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eEnjoy free shipping on your order, and every set is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808509628797,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_1eea3943-fdbd-43d5-9438-6eec42ad42d4.webp?v=1791027175"},{"product_id":"frame-hole-cover-caps-for-yamaha-yzf-r1-yzf-r1m-2015-to-2023","title":"Frame Hole Cover Caps For Yamaha YZF-R1 \/ YZF-R1M - 2015 to 2022","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eThese \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are designed to plug the unused chassis openings on the \u003cstrong\u003eYamaha YZF-R1\u003c\/strong\u003e and \u003cstrong\u003eYZF-R1M\u003c\/strong\u003e.\u003c\/h2\u003e\n\u003cp\u003eThe exposed holes left in the frame are a common detail that many riders choose to address for a cleaner finish, and these \u003cstrong\u003eABS plastic\u003c\/strong\u003e plugs provide a straightforward solution.\u003c\/p\u003e\n\u003cp\u003eAvailable in two variants — with the R1 logo or plain — the set includes four caps that press into place without any tools or permanent modification to the frame.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eframe hole covers\u003c\/strong\u003e seal off the open \u003cstrong\u003echassis plugs\u003c\/strong\u003e that are visible on the lower section of the YZF-R1 frame. This keeps road debris, moisture, and grime out of the frame cavities, helping to protect the underlying structure over the long term.\u003c\/p\u003e\n\u003cp\u003eMade from ABS plastic, the caps are lightweight and resistant to the heat and vibration typical of track and street use. The black finish blends with the frame without drawing attention away from the rest of the motorcycle.\u003c\/p\u003e\n\u003cp\u003eInstallation requires no tools and no drilling. Each plug presses directly into the existing frame opening and stays in place through friction fit, making removal just as simple if needed.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole openings with a dry cloth to remove any dirt or grease. Align each ABS cap with the corresponding frame opening. Press each cap firmly into the hole until it seats flush with the frame surface. Check all four caps are fully seated and secure before riding.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eWith R1 Logo\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eYamaha YZF-R1\u003c\/strong\u003e (2015–2022) and \u003cstrong\u003eYamaha YZF-R1M\u003c\/strong\u003e (2016–2018). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eWill these caps fit both the YZF-R1 and the YZF-R1M?\u003c\/h3\u003e\n\u003cp\u003eYes. The caps are listed as compatible with the Yamaha YZF-R1 from 2015 to 2022 and the YZF-R1M from 2016 to 2018.\u003c\/p\u003e\n\u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n\u003cp\u003eEach set includes 4 chassis plugs. No tools or hardware are required for installation.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set of frame hole covers is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808759124349,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_02_d484f1ba-bc2b-437c-8fd3-0bb3878ff31a.webp?v=1791031791"},{"product_id":"frame-hole-cover-caps-for-yamaha-mt-07-2024-to-2026","title":"Frame Hole Cover Caps For Yamaha MT-07 - 2013 to 2027","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eThe \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are a simple, direct-fit upgrade for the \u003cstrong\u003eYamaha MT-07\u003c\/strong\u003e (\u003cstrong\u003e2013-2027\u003c\/strong\u003e).\u003c\/h2\u003e\n\u003cp\u003eThe MT-07 frame ships from the factory with several open holes that are left exposed after assembly. These \u003cstrong\u003eplastic cover caps\u003c\/strong\u003e fill those openings, keeping out road debris, moisture, and grime.\u003c\/p\u003e\n\u003cp\u003eThe caps press into place without tools and do not require drilling or modification to the frame. Each set includes 8 pieces to cover all accessible \u003cstrong\u003eframe holes\u003c\/strong\u003e on the bike, providing straightforward \u003cstrong\u003eframe protection\u003c\/strong\u003e with no permanent changes to the chassis.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eExposed frame holes act as entry points for moisture and road grit, which can lead to corrosion inside the frame tubing over time. The frame hole cover caps seal these openings and protect the internal structure of the chassis.\u003c\/p\u003e\n\u003cp\u003eInstallation requires no tools and no permanent modification. The plastic cover caps press firmly into the existing holes and hold securely under normal riding conditions, making them easy to fit and remove if needed.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame hole opening with a dry cloth to remove any dirt or debris. Align each cap over the corresponding hole in the frame. Press each cap firmly until it seats flush with the frame surface. Inspect each cap to confirm it is fully seated and secure.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eYamaha MT-07\u003c\/strong\u003e (2013–2027). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set includes 8 frame hole cover caps.\u003c\/p\u003e\n\u003ch3\u003eDo these require any tools or drilling to install?\u003c\/h3\u003e\n\u003cp\u003eNo tools or drilling are required — the caps press directly into the existing frame holes.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eOrders ship free, and every set of frame hole cover caps is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"2024 to 2027","offer_id":58814739513725,"sku":null,"price":39.9,"currency_code":"USD","in_stock":true},{"title":"2013 to 2023","offer_id":58814739546493,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/Sa7babd1c16244a16a9bbf15863d22c80N.avif?v=1791108463"},{"product_id":"frame-hole-cap-set-for-bmw-r-1300-gs-r-1300-gs-adventure-2023-to-2023","title":"Frame Hole Cap Set For BMW R 1300 GS \/ R 1300 GS Adventure - 2023 to 2023","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cap Set For BMW R 1300 GS \/ R 1300 GS Adventure - 2023 to 2023\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eframe hole cap set\u003c\/strong\u003e for the \u003cstrong\u003eBMW R 1300 GS\u003c\/strong\u003e and \u003cstrong\u003eR 1300 GS Adventure\u003c\/strong\u003e fills the open frame access holes left exposed from the factory. Each cap is molded in \u003cstrong\u003eABS plastic\u003c\/strong\u003e and features a debossed star logo, giving the frame a finished look rather than bare open ports.\u003c\/p\u003e\n  \u003cp\u003eThe set covers multiple frame holes across the chassis. Caps press into place without tools or permanent modification, making installation straightforward and fully reversible.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe ABS plastic construction resists the elements that a GS encounters on and off road. The \u003cstrong\u003ematte black finish\u003c\/strong\u003e blends with the frame and complements the bike's existing hardware without standing out.\u003c\/p\u003e\n  \u003cp\u003eLeaving frame holes open invites dirt, moisture, and road debris into the cavities. These \u003cstrong\u003eframe hole caps\u003c\/strong\u003e seal those openings, reducing the chance of long-term corrosion or contamination inside the frame tubes.\u003c\/p\u003e\n  \u003cp\u003eBecause each cap uses a \u003cstrong\u003epress-fit design\u003c\/strong\u003e with no adhesive or fasteners required, the full set can be installed or removed without tools and without leaving any marks on the frame.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame hole opening with a dry cloth to remove dust and debris. Align each cap with its corresponding frame hole, noting the orientation of the logo if desired. Press each cap firmly into the hole until it seats flush with the surrounding frame surface. Inspect each cap to confirm it sits flat and does not move when pressed from the side.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eFull Set\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eBMW R 1300 GS\u003c\/strong\u003e (2023–2023) and \u003cstrong\u003eBMW R 1300 GS Adventure\u003c\/strong\u003e (2023–2023). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eDoes this set cover all frame holes on the R1300GS and Adventure?\u003c\/h3\u003e\n  \u003cp\u003eThe listing describes it as a full set covering the frame holes on both the R 1300 GS and R 1300 GS Adventure 2023 — verify exact hole count against the product images before installing.\u003c\/p\u003e\n  \u003ch3\u003eDo the caps require any tools or adhesive to install?\u003c\/h3\u003e\n  \u003cp\u003eNo tools or adhesive are needed; each cap presses directly into the frame hole and seats flush without permanent modification.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set is backed by a 1-year warranty against defects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58809247203709,"sku":null,"price":49.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_b47b6764-5293-4eac-920c-46c57762590d.webp?v=1791108178"},{"product_id":"frame-hole-caps-for-kawasaki-kle500-2026-to-2026","title":"Frame Hole Caps For Kawasaki KLE500 - 2026 to 2027","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eFrame Hole Caps For Kawasaki KLE500 - 2026 to 2027\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003eframe hole caps\u003c\/strong\u003e are designed to fit the \u003cstrong\u003eKawasaki KLE500\u003c\/strong\u003e, filling the open ports left in the frame after assembly. Each cap presses directly into its corresponding hole, sealing out water, mud, and road debris that would otherwise accumulate inside the frame tubes.\u003c\/p\u003e\n\u003cp\u003eMade from \u003cstrong\u003eABS plastic\u003c\/strong\u003e, these caps match the black finish common to the KLE500 frame and sit flush with the surrounding surface. The set covers the visible frame holes on this model, delivering a cleaner look without any permanent modification.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eFrame hole caps block moisture and grit from entering \u003cstrong\u003eopen frame ports\u003c\/strong\u003e. On an adventure-oriented machine like the KLE500, \u003cstrong\u003epreventing corrosion\u003c\/strong\u003e from forming inside the frame tubes over time is a straightforward and worthwhile measure.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003epress-in design\u003c\/strong\u003e requires no tools and no drilling. Each cap seats firmly in its hole and can be removed if needed, making this a reversible upgrade that does not affect the factory structure of the frame.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eblack ABS plastic\u003c\/strong\u003e finish integrates naturally with the KLE500 frame, eliminating the unfinished look of open holes without adding bulk or altering the profile of the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame hole opening and remove any dirt or moisture. Align the cap with the hole, ensuring the tabs or ridges face inward. Press the cap firmly into the hole until it seats flush with the frame surface. Repeat for each remaining hole.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eKawasaki KLE500\u003c\/strong\u003e. Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eWhat year KLE500 does this fit?\u003c\/h3\u003e\n\u003cp\u003eThis set is listed specifically for the Kawasaki KLE500.\u003c\/p\u003e\n\u003ch3\u003eDo these caps require any tools or drilling to install?\u003c\/h3\u003e\n\u003cp\u003eNo tools or drilling are needed — each cap presses directly into the frame hole and seats flush.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58809257918845,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_209543a1-c088-4952-bdd9-6618ac6f13fa.webp?v=1791035925"},{"product_id":"frame-end-caps-for-honda-crf250l-crf250l-rally-2012-to-2022","title":"Frame End Caps For Honda CRF250L \/ CRF250L Rally - 2012 to 2022","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame End Caps For Honda CRF250L \/ CRF250L Rally - 2012 to 2022\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eframe end caps\u003c\/strong\u003e for the \u003cstrong\u003eHonda CRF250L\u003c\/strong\u003e and \u003cstrong\u003eCRF250L Rally\u003c\/strong\u003e plug the open frame holes left exposed from the factory. Made from \u003cstrong\u003eplastic\u003c\/strong\u003e, they press directly into the frame openings to keep out dirt, moisture, and debris that can accumulate inside the tubular frame over time.\u003c\/p\u003e\n  \u003cp\u003eAvailable in two versions — a plain finish without branding or a version embossed with the \u003cstrong\u003eCRF logo\u003c\/strong\u003e — these caps add a finished look to the lower frame section without any modification to the bike.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eframe hole plugs\u003c\/strong\u003e seal unused frame openings against trail dust and water ingress, protecting the interior of the frame tubes on the Honda CRF250L. This is especially relevant for the CRF250L Rally, which is often used in wet and unpaved conditions.\u003c\/p\u003e\n  \u003cp\u003eInstallation requires no tools and no drilling. Each cap presses into the existing opening using the factory hole dimensions, making fitment straightforward and fully reversible with \u003cstrong\u003eno permanent modification\u003c\/strong\u003e to the bike.\u003c\/p\u003e\n  \u003cp\u003eThe CRF logo variant adds a subtle factory-style detail to the lower frame, while the no-logo version blends cleanly into the frame finish for riders who prefer a stock appearance.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole openings with a dry cloth to remove any dirt or grease. Align the cap with the frame opening. Press the cap firmly into the hole until it seats flush with the frame surface. Repeat for each remaining opening.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eNo Logo\u003c\/strong\u003e and \u003cstrong\u003eCRF Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eHonda CRF250L\u003c\/strong\u003e (2012+) and \u003cstrong\u003eHonda CRF250L Rally\u003c\/strong\u003e (2017+). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWhich model years does this fit?\u003c\/h3\u003e\n  \u003cp\u003eThese frame end caps fit the Honda CRF250L from 2012 onwards and the CRF250L Rally from 2017 onwards.\u003c\/p\u003e\n  \u003ch3\u003eWhat is the difference between the two variants?\u003c\/h3\u003e\n  \u003cp\u003eBoth variants are identical in fit and material — the only difference is that the CRF logo version has the CRF emblem embossed on the cap face, while the no-logo version has a plain finish.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"No Logo","offer_id":58809261752701,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true},{"title":"CRF Logo","offer_id":58809261785469,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_622d6683-c178-4e5f-ada5-a87057c83c81.webp?v=1791107778"},{"product_id":"frame-hole-cover-caps-for-ducati-multistrada-1260-950-2018-to-2021","title":"Frame Hole Cover Caps For Ducati Multistrada 1260 \/ 950 - 2018 to 2021","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover Caps For Ducati Multistrada 1260 \/ 950 - 2018 to 2021\u003c\/h2\u003e\n  \u003cp\u003eThe factory frame on the \u003cstrong\u003eDucati Multistrada 1260\u003c\/strong\u003e, \u003cstrong\u003eMultistrada 1260S\u003c\/strong\u003e, \u003cstrong\u003eMultistrada 950\u003c\/strong\u003e, and \u003cstrong\u003eMultistrada 950S\u003c\/strong\u003e leaves several open cavities in the chassis tubes. These \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e snap directly into those openings, sealing them against road debris, moisture, and grime.\u003c\/p\u003e\n  \u003cp\u003eAvailable in two finishes — with logo or without logo — the \u003cstrong\u003eset of 4\u003c\/strong\u003e plastic caps installs in seconds and requires no tools or drilling. They sit flush with the frame for clean, reliable \u003cstrong\u003eframe protection\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThese frame hole cover caps keep dirt, water, and small debris out of the open frame tubes on your Multistrada. Keeping those cavities sealed helps prevent internal corrosion and makes the chassis easier to clean after a long ride.\u003c\/p\u003e\n  \u003cp\u003eThe \u003cstrong\u003epress-fit\u003c\/strong\u003e design means the caps go on and come off without any permanent modification to the bike. Whether you prefer the logo version for a branded look or the plain version for a cleaner aesthetic, both options deliver the same functional protection.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame holes and surrounding area to remove any dirt or moisture. Select the correct cap size for each opening. Press each cap firmly into the frame hole until it seats flush. Check that all 4 caps are fully seated and secure.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eWith Logo\u003c\/strong\u003e and \u003cstrong\u003eWithout Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eDucati Multistrada 1260\u003c\/strong\u003e (2018–2021), \u003cstrong\u003eDucati Multistrada 1260S\u003c\/strong\u003e (2018–2021), \u003cstrong\u003eDucati Multistrada 950\u003c\/strong\u003e (2018–2020) and \u003cstrong\u003eDucati Multistrada 950S\u003c\/strong\u003e (2018–2020). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWhich Ducati models does this set fit?\u003c\/h3\u003e\n  \u003cp\u003eThese caps fit the Ducati Multistrada 1260 and 1260S (2018-2021) and the Multistrada 950 and 950S (2018-2020).\u003c\/p\u003e\n  \u003ch3\u003eHow many caps are included and do I need any tools?\u003c\/h3\u003e\n  \u003cp\u003eThe set includes 4 caps that press directly into the frame holes — no tools or drilling required.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58809266667901,"sku":null,"price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_86ee76dd-ecf0-41f7-8c47-5855ac65a0ac.webp?v=1791107640"},{"product_id":"frame-hole-cover-caps-yamaha-xsr-700","title":"Frame Hole Cover Caps For Yamaha XSR 700","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eThe \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are a simple, direct-fit upgrade for the \u003cstrong\u003eYamaha XSR 700\u003c\/strong\u003e.\u003c\/h2\u003e\n\u003cp\u003eThe XSR 700 frame ships from the factory with several open holes that are left exposed after assembly. These \u003cstrong\u003eplastic cover caps\u003c\/strong\u003e fill those openings, keeping out road debris, moisture, and grime.\u003c\/p\u003e\n\u003cp\u003eThe caps press into place without tools and do not require drilling or modification to the frame. Each set includes 8 pieces to cover all accessible \u003cstrong\u003eframe holes\u003c\/strong\u003e on the bike, providing straightforward \u003cstrong\u003eframe protection\u003c\/strong\u003e with no permanent changes to the chassis.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eExposed frame holes act as entry points for moisture and road grit, which can lead to corrosion inside the frame tubing over time. The frame hole cover caps seal these openings and protect the internal structure of the chassis.\u003c\/p\u003e\n\u003cp\u003eInstallation requires no tools and no permanent modification. The plastic cover caps press firmly into the existing holes and hold securely under normal riding conditions, making them easy to fit and remove if needed.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame hole opening with a dry cloth to remove any dirt or debris. Align each cap over the corresponding hole in the frame. Press each cap firmly until it seats flush with the frame surface. Inspect each cap to confirm it is fully seated and secure.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eYamaha XSR 700\u003c\/strong\u003e. Check your model year against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set includes 8 frame hole cover caps.\u003c\/p\u003e\n\u003ch3\u003eDo these require any tools or drilling to install?\u003c\/h3\u003e\n\u003cp\u003eNo tools or drilling are required — the caps press directly into the existing frame holes.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eOrders ship free, and every set of frame hole cover caps is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58814894932349,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/Sa7babd1c16244a16a9bbf15863d22c80N.jpg?v=1791120024"},{"product_id":"frame-hole-cover-caps-yamaha-tracer-700","title":"Frame Hole Cover Caps For Yamaha Tracer 700","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eThe \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are a simple, direct-fit upgrade for the \u003cstrong\u003eYamaha Tracer 700\u003c\/strong\u003e.\u003c\/h2\u003e\n\u003cp\u003eThe Tracer 700 frame ships from the factory with several open holes that are left exposed after assembly. These \u003cstrong\u003eplastic cover caps\u003c\/strong\u003e fill those openings, keeping out road debris, moisture, and grime.\u003c\/p\u003e\n\u003cp\u003eThe caps press into place without tools and do not require drilling or modification to the frame. Each set includes 8 pieces to cover all accessible \u003cstrong\u003eframe holes\u003c\/strong\u003e on the bike, providing straightforward \u003cstrong\u003eframe protection\u003c\/strong\u003e with no permanent changes to the chassis.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eExposed frame holes act as entry points for moisture and road grit, which can lead to corrosion inside the frame tubing over time. The frame hole cover caps seal these openings and protect the internal structure of the chassis.\u003c\/p\u003e\n\u003cp\u003eInstallation requires no tools and no permanent modification. The plastic cover caps press firmly into the existing holes and hold securely under normal riding conditions, making them easy to fit and remove if needed.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame hole opening with a dry cloth to remove any dirt or debris. Align each cap over the corresponding hole in the frame. Press each cap firmly until it seats flush with the frame surface. Inspect each cap to confirm it is fully seated and secure.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eYamaha Tracer 700\u003c\/strong\u003e. Check your model year against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set includes 8 frame hole cover caps.\u003c\/p\u003e\n\u003ch3\u003eDo these require any tools or drilling to install?\u003c\/h3\u003e\n\u003cp\u003eNo tools or drilling are required — the caps press directly into the existing frame holes.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eOrders ship free, and every set of frame hole cover caps is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58814896243069,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/Sa7babd1c16244a16a9bbf15863d22c80N_a3061fa7-2486-4a1d-b5c7-9ac9f203e47a.jpg?v=1791120068"},{"product_id":"frame-hole-cover-caps-for-honda-monkey-125-2018-to-2022","title":"Frame Hole Cover Caps For Honda Monkey 125 - 2018 to 2022","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eThe \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are a simple, direct-fit upgrade for the \u003cstrong\u003eYamaha Tracer 700\u003c\/strong\u003e.\u003c\/h2\u003e\n\u003cp\u003eThe Tracer 700 frame ships from the factory with several open holes that are left exposed after assembly. These \u003cstrong\u003eplastic cover caps\u003c\/strong\u003e fill those openings, keeping out road debris, moisture, and grime.\u003c\/p\u003e\n\u003cp\u003eThe caps press into place without tools and do not require drilling or modification to the frame. Each set includes 8 pieces to cover all accessible \u003cstrong\u003eframe holes\u003c\/strong\u003e on the bike, providing straightforward \u003cstrong\u003eframe protection\u003c\/strong\u003e with no permanent changes to the chassis.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eExposed frame holes act as entry points for moisture and road grit, which can lead to corrosion inside the frame tubing over time. The frame hole cover caps seal these openings and protect the internal structure of the chassis.\u003c\/p\u003e\n\u003cp\u003eInstallation requires no tools and no permanent modification. The plastic cover caps press firmly into the existing holes and hold securely under normal riding conditions, making them easy to fit and remove if needed.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame hole opening with a dry cloth to remove any dirt or debris. Align each cap over the corresponding hole in the frame. Press each cap firmly until it seats flush with the frame surface. Inspect each cap to confirm it is fully seated and secure.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eYamaha Tracer 700\u003c\/strong\u003e. Check your model year against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set includes 8 frame hole cover caps.\u003c\/p\u003e\n\u003ch3\u003eDo these require any tools or drilling to install?\u003c\/h3\u003e\n\u003cp\u003eNo tools or drilling are required — the caps press directly into the existing frame holes.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eOrders ship free, and every set of frame hole cover caps is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58815592497533,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/honda_125_monkey_frame_plugs.jpg?v=1791129923"},{"product_id":"frame-hole-caps-for-kawasaki-eliminator-400-450-500-2023-to-2027","title":"Frame Hole Caps For Kawasaki Eliminator 400\/450\/500 - 2023 to 2027","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eFrame Hole Caps For Kawasaki KLE500 - 2026 to 2027\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003eframe hole caps\u003c\/strong\u003e are designed to fit the \u003cstrong\u003eKawasaki KLE500\u003c\/strong\u003e, filling the open ports left in the frame after assembly. Each cap presses directly into its corresponding hole, sealing out water, mud, and road debris that would otherwise accumulate inside the frame tubes.\u003c\/p\u003e\n\u003cp\u003eMade from \u003cstrong\u003eABS plastic\u003c\/strong\u003e, these caps match the black finish common to the KLE500 frame and sit flush with the surrounding surface. The set covers the visible frame holes on this model, delivering a cleaner look without any permanent modification.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eFrame hole caps block moisture and grit from entering \u003cstrong\u003eopen frame ports\u003c\/strong\u003e. On an adventure-oriented machine like the KLE500, \u003cstrong\u003epreventing corrosion\u003c\/strong\u003e from forming inside the frame tubes over time is a straightforward and worthwhile measure.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003epress-in design\u003c\/strong\u003e requires no tools and no drilling. Each cap seats firmly in its hole and can be removed if needed, making this a reversible upgrade that does not affect the factory structure of the frame.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eblack ABS plastic\u003c\/strong\u003e finish integrates naturally with the KLE500 frame, eliminating the unfinished look of open holes without adding bulk or altering the profile of the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame hole opening and remove any dirt or moisture. Align the cap with the hole, ensuring the tabs or ridges face inward. Press the cap firmly into the hole until it seats flush with the frame surface. Repeat for each remaining hole.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eKawasaki KLE500\u003c\/strong\u003e. Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eWhat year KLE500 does this fit?\u003c\/h3\u003e\n\u003cp\u003eThis set is listed specifically for the Kawasaki KLE500.\u003c\/p\u003e\n\u003ch3\u003eDo these caps require any tools or drilling to install?\u003c\/h3\u003e\n\u003cp\u003eNo tools or drilling are needed — each cap presses directly into the frame hole and seats flush.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58815668781437,"sku":null,"price":49.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/05_17d176ea-d55b-4844-9825-cb6232a813f5.webp?v=1791133462"},{"product_id":"frame-hole-caps-for-honda-cb125r-cb300r-2018-to-2022","title":"Frame Hole Caps For Honda CB125R \/ CB300R - 2018 to 2022","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Caps For Honda CB125R \/ CB300R - 2018 to 2022\u003c\/h2\u003e\n  \u003cp\u003eThese \u003cstrong\u003eframe hole caps\u003c\/strong\u003e are designed to plug the exposed screw holes in the fairing and frame of the \u003cstrong\u003eHonda CB125R\u003c\/strong\u003e and CB300R. Left uncovered, those openings collect dirt and moisture and detract from the bike's finished appearance. A straightforward press-in fit means installation takes seconds without any tools.\u003c\/p\u003e\n  \u003cp\u003eAvailable in plain black or black with an engraved \u003cstrong\u003eCB logo\u003c\/strong\u003e, both options blend cleanly with the stock fairing color and give the frame a tidy, production-quality look.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe caps seal open frame cavities, keeping road grime and water out of areas that are otherwise difficult to clean or inspect. This is a minor but practical detail that helps preserve the underlying hardware.\u003c\/p\u003e\n  \u003cp\u003eThe CB logo variant adds a subtle branded touch that complements the stock styling of the CB125R and CB300R without any permanent modification. The plain black variant suits riders who prefer a cleaner, understated finish.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Identify the exposed frame or fairing screw holes on your CB125R or CB300R. Press each cap firmly into the opening until it seats flush with the surrounding surface. Verify that all caps are secure and seated evenly before riding.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack – No Logo\u003c\/strong\u003e and \u003cstrong\u003eBlack – CB Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eHonda CB125R\u003c\/strong\u003e (2018–2022) and \u003cstrong\u003eHonda CB300R\u003c\/strong\u003e (2018–2022). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWhich model years does this fit?\u003c\/h3\u003e\n  \u003cp\u003eThese caps are listed for the Honda CB125R and CB300R from 2018 through 2022.\u003c\/p\u003e\n  \u003ch3\u003eWhat is included in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe listing includes a set of 2 caps, available in plain black or black with an engraved CB logo.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eEvery order ships free, and your frame hole caps are backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58820347789693,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_02_c59084a2-0cae-4371-acbc-0bfcc1867a13.webp?v=1791192568"},{"product_id":"frame-hole-plug-set-for-suzuki-hayabusa-gsx1300r-1999-to-2015","title":"Frame Hole Plug Set For Suzuki Hayabusa GSX1300R - 1999 to 2015","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Plug Set For Suzuki Hayabusa GSX1300R - 1999 to 2015\u003c\/h2\u003e\n  \u003cp\u003eThese rubber \u003cstrong\u003eframe hole plugs\u003c\/strong\u003e are designed to fill unused screw and frame holes on the \u003cstrong\u003eSuzuki Hayabusa\u003c\/strong\u003e \u003cstrong\u003eGSX1300R\u003c\/strong\u003e. Left exposed, these openings collect moisture, road grime, and contaminants that accelerate corrosion from the inside out. The plugs press directly into the corresponding hole positions without tools or hardware.\u003c\/p\u003e\n  \u003cp\u003eThe set includes five plugs in varying sizes to cover the multiple openings found across the Hayabusa frame. Made from a rubber compound, each plug provides a waterproof, \u003cstrong\u003edust-proof\u003c\/strong\u003e, and rust-resistant seal that holds up to daily riding conditions.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe rubber frame hole plugs seal frame cavities against water intrusion and road debris. On a sport bike like the Hayabusa, exposed frame holes are a direct path for moisture to reach bare metal, leading to rust that is difficult to treat once it takes hold.\u003c\/p\u003e\n  \u003cp\u003eEach plug presses firmly into place using the existing hole geometry, requiring no adhesive, drilling, or tools. Removal is equally straightforward should you need access to any frame point for maintenance or customization.\u003c\/p\u003e\n  \u003cp\u003eThe set of five covers the range of hole sizes present on the GSX1300R frame, so every opening is addressed in one purchase. The black finish blends with the frame and does not draw attention away from the rest of the motorcycle.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame hole with a dry cloth to remove dust and moisture. Select the plug that matches the diameter of the hole. Press the plug firmly into the hole until it seats flush with the frame surface. Repeat for each remaining hole position.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eSuzuki Hayabusa GSX1300R\u003c\/strong\u003e (1999–2015). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eHow many plugs are included and what sizes are in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe set contains 5 rubber plugs. The exact individual diameters are not specified by the seller — verify sizing against your frame holes before installing.\u003c\/p\u003e\n  \u003ch3\u003eDo these require any tools or adhesive to install?\u003c\/h3\u003e\n  \u003cp\u003eNo tools or adhesive are needed. Each plug presses directly into the corresponding frame hole position.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eYour order ships free, and every set is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58820916150653,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_03_181cc19d-baef-40a1-b2d0-ede1964c77f6.webp?v=1791195740"},{"product_id":"frame-hole-cover-caps-for-kawasaki-ninja-400-ninja-500-z400-2018-to-2026","title":"Frame Hole Cover Caps For Kawasaki Ninja 400 \/ Ninja 500 \/ Z400 - 2018 to 2026","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover Caps For Kawasaki Ninja 400 \/ Ninja 500 \/ Z400 - 2018 to 2026\u003c\/h2\u003e\n  \u003cp\u003eThese \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are designed to plug the unused access holes found in the frame of the \u003cstrong\u003eKawasaki Ninja 400\u003c\/strong\u003e, Ninja 500, \u003cstrong\u003eZ400\u003c\/strong\u003e, and \u003cstrong\u003eZ500\u003c\/strong\u003e. Left open from the factory, those holes collect road grime and moisture, and give the frame an unfinished look. The caps press directly into the openings with no tools required, restoring a clean, uniform appearance along the frame rails.\u003c\/p\u003e\n  \u003cp\u003eThe caps are finished in black to blend with the OEM frame and are visible in the lower frame area, as shown in the product photo. Install takes only seconds per cap.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eFrame hole cover caps keep road debris and moisture out of the open cavities in the chassis. On everyday rides, exposed frame holes act as collection points for dirt and water that can be difficult to clean — sealing them simplifies maintenance and keeps the frame looking tidy.\u003c\/p\u003e\n  \u003cp\u003eThe \u003cstrong\u003epress-fit\u003c\/strong\u003e design means no drilling, no adhesive, and no permanent modification to your Ninja 400, Ninja 500, Z400, or Z500. The caps seat firmly into the existing openings and can be removed just as easily if access is needed later.\u003c\/p\u003e\n  \u003cp\u003eWith a \u003cstrong\u003eblack finish\u003c\/strong\u003e that closely matches the factory frame color, the frame hole cover caps deliver a factory-finished look without any visible hardware. It is a straightforward upgrade that most riders will notice only in its absence.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole opening and surrounding area with a dry cloth to remove any dirt or oil. Align the cap with the frame hole, ribbed side inward. Press the cap firmly into the hole until it seats flush with the frame surface. Repeat for each remaining hole.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eKawasaki Ninja 400\u003c\/strong\u003e (2018–2026), \u003cstrong\u003eKawasaki Ninja 500\u003c\/strong\u003e (2018–2026), \u003cstrong\u003eKawasaki Z400\u003c\/strong\u003e (2018–2026) and \u003cstrong\u003eKawasaki Z500\u003c\/strong\u003e (2018–2026). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe exact quantity per set is not specified in the listing — please check with us before ordering if you need to cover a specific number of holes.\u003c\/p\u003e\n  \u003ch3\u003eDo these caps require any tools or adhesive to install?\u003c\/h3\u003e\n  \u003cp\u003eNo tools or adhesive are needed. The caps press directly into the existing frame openings and hold securely by friction.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set of frame hole cover caps is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58820922966397,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/wmremove-transformed_5.webp?v=1791204900"},{"product_id":"frame-hole-cap-plug-kit-for-ktm-adventure-1050-1090-1190-1290","title":"Frame Hole Cap Plug Kit For KTM Adventure 1050 \/ 1090 \/ 1190 \/ 1290","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cap Plug Kit For KTM Adventure 1050 \/ 1090 \/ 1190 \/ 1290\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eframe hole cap plug kit\u003c\/strong\u003e is a set of press-fit plastic covers designed to fill the unused openings in the frame of the \u003cstrong\u003eKTM Adventure 1050\u003c\/strong\u003e, 1090, 1190, and 1290. Left open from the factory, these holes collect road debris, moisture, and grime over time. The plugs snap firmly into each port, keeping the interior of the frame tubes clean and protected.\u003c\/p\u003e\n  \u003cp\u003eEach cap features a ribbed exterior that grips the inside wall of the frame hole securely without adhesive or hardware. The result is a tidy, finished look along the frame that takes only seconds to install.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole cap plug kit prevents dirt, water, and small debris from entering the frame tubes through factory openings. Keeping these passages sealed reduces the risk of internal corrosion and makes routine cleaning far easier.\u003c\/p\u003e\n  \u003cp\u003eThe \u003cstrong\u003eribbed plastic\u003c\/strong\u003e design grips the frame opening firmly on contact. No tools, adhesive, or permanent modification to the frame is required, making removal just as straightforward as installation if needed.\u003c\/p\u003e\n  \u003cp\u003eThe uniform black finish blends cleanly with the KTM Adventure frame. Covering raw, open holes gives the chassis a deliberate, factory-finished appearance rather than an aftermarket patchwork look.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame opening with a dry cloth to remove dust or residue. Select the plug that matches the diameter of the hole. Press the plug firmly into the opening until the ribbed collar seats flush against the frame surface. Repeat for each remaining hole in the set.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eFrame Hole Cap Kit - Black\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eKTM Adventure 1050\u003c\/strong\u003e, \u003cstrong\u003eKTM Adventure 1090\u003c\/strong\u003e, \u003cstrong\u003eKTM Adventure 1190\u003c\/strong\u003e and \u003cstrong\u003eKTM Adventure 1290\u003c\/strong\u003e. Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWhich KTM Adventure models does this kit fit?\u003c\/h3\u003e\n  \u003cp\u003eThis kit is listed for the KTM Adventure 1050, 1090, 1190, and 1290. The seller lists all years for those models, but verify against your specific build year before ordering.\u003c\/p\u003e\n  \u003ch3\u003eWhat is included in the kit?\u003c\/h3\u003e\n  \u003cp\u003eThe kit includes a set of plastic frame hole caps in multiple sizes to cover the factory openings on the frame; no additional hardware is required.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and this product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58824816689533,"sku":null,"price":49.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_c6d4733b-0392-483e-8507-d75222f0b902.webp?v=1791205703"},{"product_id":"frame-hole-plugs-for-suzuki-v-strom-650-dl650-2012-to-2022","title":"Frame Hole Plugs For Suzuki V-Strom 650 DL650 - 2012 to 2022","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Plugs For Suzuki V-Strom 650 DL650 - 2012 to 2022\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eframe hole plugs\u003c\/strong\u003e for the Suzuki \u003cstrong\u003eV-Strom 650\u003c\/strong\u003e \u003cstrong\u003eDL650\u003c\/strong\u003e are designed to cover the unused openings left in the frame — openings that are present from the factory but serve no purpose once the bike is assembled. Left exposed, these holes collect dirt, moisture, and road debris over time.\u003c\/p\u003e\n  \u003cp\u003eEach plug presses directly into the frame opening with no tools or hardware needed. The result is a cleaner, more finished look across the frame without any permanent modification to the bike.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole plugs seal \u003cstrong\u003eunused frame openings\u003c\/strong\u003e against water and debris intrusion. On an adventure-touring bike like the V-Strom 650, where exposure to rain, mud, and gravel is routine, keeping moisture out of hollow frame sections is a straightforward preventive measure.\u003c\/p\u003e\n  \u003cp\u003eInstallation requires no tools. Each plug is pressed into its corresponding frame opening by hand and held in place by the ribbed outer edge. Removal is equally simple, making them fully reversible if needed.\u003c\/p\u003e\n  \u003cp\u003eThe set covers the frame holes present on the DL650 from 2012 through 2022, so there is no guesswork about fitment across model years in that range.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame opening and surrounding area to remove any dirt or oil. Align the plug with the opening, ribbed side facing the frame. Press the plug firmly by hand until it seats flush with the frame surface. Repeat for each remaining opening.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eSuzuki V-Strom 650 DL650\u003c\/strong\u003e (2012–2022). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eHow many plugs are included in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe set includes 4 plugs, covering the unused frame openings on the V-Strom 650 DL650.\u003c\/p\u003e\n  \u003ch3\u003eDo these require any tools or drilling to install?\u003c\/h3\u003e\n  \u003cp\u003eNo tools or drilling are required — each plug presses directly into the frame opening by hand.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set of frame hole plugs is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58824900837757,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_718fc8be-c683-494f-a608-10046c2e68b7.webp?v=1791210322"},{"product_id":"frame-hole-cover-plugs-for-suzuki-v-strom-800-de-2023-to-2024","title":"Frame Hole Cover Plugs For Suzuki V-Strom 800 DE - 2023 to 2024","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover Plugs For Suzuki V-Strom 800 DE - 2023 to 2024\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eframe hole cover plugs\u003c\/strong\u003e are a simple, purpose-made solution for the open frame ports on the \u003cstrong\u003eSuzuki V-Strom 800 DE\u003c\/strong\u003e. Left uncapped, these holes collect moisture, road grime, and debris that can work against the frame over time. These \u003cstrong\u003eABS plastic\u003c\/strong\u003e plugs snap directly into place, sealing each port cleanly without any tools or permanent modification.\u003c\/p\u003e\n  \u003cp\u003eAvailable in two versions — one bearing the V-Strom logo and one plain — so you can match the look you want. Each set includes two plugs, one for each side of the frame.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eFitting these frame hole cover plugs keeps water and trail debris out of the tubular frame openings on the V-Strom 800 DE. A clean seal at each port means less cleaning effort after every ride and no hidden corrosion buildup inside the frame.\u003c\/p\u003e\n  \u003cp\u003eThe ABS plastic construction is lightweight and resistant to the heat and vibration typical of daily riding. The plugs sit flush with the surrounding frame, giving the chassis a factory-finished appearance rather than the raw, open look of unplugged ports.\u003c\/p\u003e\n  \u003cp\u003eBecause the plugs press directly into the existing frame holes, there is no drilling, no adhesive, and nothing that marks the frame permanently. Removal is equally straightforward if you ever need access to the frame interior.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole openings with a dry cloth to remove any dirt or moisture. Align each plug with its corresponding frame hole. Press the plug firmly into the hole until it seats flush with the frame surface. Repeat for the second plug on the opposite side.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eV-Strom Logo\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eSuzuki V-Strom 800 DE\u003c\/strong\u003e (2023–2024). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eDoes this set cover both sides of the frame?\u003c\/h3\u003e\n  \u003cp\u003eYes, each purchase includes 2 plugs — one for each side of the frame.\u003c\/p\u003e\n  \u003ch3\u003eDo I need any tools to install these plugs?\u003c\/h3\u003e\n  \u003cp\u003eNo tools are required; the plugs press directly into the existing frame holes without drilling or adhesive.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set of frame hole cover plugs is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58824978104701,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_d79c8048-29a9-486c-bfb6-e3fcc7831589.webp?v=1791210459"},{"product_id":"frame-hole-cover-caps-for-moto-guzzi-v85tt-2019-to-2022","title":"Frame Hole Cover Caps For Moto Guzzi V85TT - 2019 to 2022","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover Caps For Moto Guzzi V85TT - 2019 to 2022\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eMoto Guzzi V85TT\u003c\/strong\u003e leaves several frame holes exposed from the factory. These \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e fill those openings with a clean, finished appearance that keeps the chassis looking tidy and prevents debris from entering the frame tubes.\u003c\/p\u003e\n  \u003cp\u003eMade from \u003cstrong\u003eABS plastic\u003c\/strong\u003e, each cap presses directly into the frame opening without any drilling or modification. The set covers all six holes and is available in two versions: one with the \u003cstrong\u003eV85TT logo\u003c\/strong\u003e and one without.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThese frame hole cover caps are a direct-fit solution for the Moto Guzzi V85TT, designed to match the factory frame openings exactly. No trimming or adaptation is needed — each cap simply presses into place and stays secure without hardware.\u003c\/p\u003e\n  \u003cp\u003eThe ABS plastic construction resists vibration and road debris, keeping the \u003cstrong\u003eframe plugs\u003c\/strong\u003e in place through daily riding and long-distance touring. The caps are available with or without the V85TT logo, letting you choose a branded or a clean, understated finish.\u003c\/p\u003e\n  \u003cp\u003eInstalling all six caps takes only a few minutes and requires no special tools. The result is a neater chassis presentation that eliminates the open holes visible on the stock bike.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame openings with a dry cloth to remove any dust or grease. Align each cap with its corresponding frame hole. Press firmly until the cap seats flush with the frame surface. Repeat for all six holes.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eWith V85TT Logo\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eOther V85TT\u003c\/strong\u003e (2019–2022). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eDoes this kit cover all the open frame holes on the V85TT?\u003c\/h3\u003e\n  \u003cp\u003eYes, the set includes 6 caps designed to fill the exposed frame holes on the Moto Guzzi V85TT 2019-2022.\u003c\/p\u003e\n  \u003ch3\u003eDo I need any tools to install these caps?\u003c\/h3\u003e\n  \u003cp\u003eNo tools are required — each cap is a press-fit design that seats directly into the frame opening by hand.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"With V85TT Logo","offer_id":58825054486909,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true},{"title":"No Logo","offer_id":58825054519677,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_02_de23dc54-1758-45c2-8bcb-3906e2f79932.webp?v=1791205990"},{"product_id":"frame-hole-cover-caps-for-honda-rebel-cmx1100-2021-to-2025","title":"Frame Hole Cover Caps For Honda Rebel CMX1100 - 2021 to 2025","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover Caps For Honda Rebel CMX1100 - 2021 to 2025\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e for the \u003cstrong\u003eHonda Rebel CMX1100\u003c\/strong\u003e are CNC-machined aluminum plugs designed to fill the \u003cstrong\u003eexposed frame holes\u003c\/strong\u003e left uncovered from the factory. Each cap measures 50 mm in diameter and 15 mm in height, and the full set weighs 67 g. The \u003cstrong\u003eanodized black\u003c\/strong\u003e finish matches the Rebel's dark powertrain aesthetic, and the engraved \"1100\" badge identifies the fitment at a glance.\u003c\/p\u003e\n  \u003cp\u003eThese caps install directly into the existing OEM frame openings with no drilling or cutting required. Once seated, they create a finished, clean look along the frame — closing off cavities that otherwise collect road grime and moisture.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe CNC-machined aluminum construction gives each cap a rigid, rattle-free fit. Unlike plastic plugs, aluminum holds its shape and finish through heat cycles and weather exposure, keeping the frame looking clean season after season.\u003c\/p\u003e\n  \u003cp\u003eClosing the exposed frame holes limits the ingress of road debris and moisture into cavities that run alongside the engine. This is particularly relevant for all-weather riders who put significant miles on the Rebel CMX1100.\u003c\/p\u003e\n  \u003cp\u003eThe engraved \"1100\" logo and anodized black finish integrate cleanly with the Rebel's existing frame and engine covers, maintaining the factory aesthetic without drawing unnecessary attention.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole openings with a dry cloth to remove any dust or debris. Align each cap with its corresponding frame hole. Press or thread the cap into place until it seats flush against the frame surface. Inspect each cap to confirm it is fully seated and does not move.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eHonda Rebel CMX1100\u003c\/strong\u003e (2021–2025). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWill these caps fit both the standard Rebel CMX1100 and the DCT version?\u003c\/h3\u003e\n  \u003cp\u003eThe listing specifies fitment for the Rebel CMX1100 2021-2025 without distinguishing between transmission variants — confirm DCT compatibility before ordering.\u003c\/p\u003e\n  \u003ch3\u003eWhat is included in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe listing describes a set of aluminum frame hole cover caps; the exact quantity per set is not specified in the source data — check with the seller for the piece count.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eYour order ships free, and every set is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58825144795517,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_934df4e6-5e5b-45bb-b34f-b720839d8bd5.webp?v=1791210646"},{"product_id":"frame-hole-cover-set-for-ducati-x-diavel-diavel-1260-2016-to-2025","title":"Frame Hole Cover Set For Ducati X Diavel \/ Diavel 1260 - 2016 to 2025","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover Set For Ducati X Diavel \/ Diavel 1260 - 2016 to 2025\u003c\/h2\u003e\n  \u003cp\u003eThese \u003cstrong\u003eframe hole covers\u003c\/strong\u003e are designed to fill the unused mounting holes in the trellis frame of the \u003cstrong\u003eDucati X Diavel\u003c\/strong\u003e and \u003cstrong\u003eDiavel 1260\u003c\/strong\u003e. Left exposed from the factory, those openings can collect dirt and moisture over time. A set of four covers snaps directly into place, sealing each hole cleanly.\u003c\/p\u003e\n  \u003cp\u003eTwo finish options are available: one engraved with the X Diavel wordmark and one without any logo for a cleaner look. Both are made from \u003cstrong\u003eABS plastic\u003c\/strong\u003e and measure 35 mm in diameter, keeping the added weight negligible at 0.01 kg per cover.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole covers block road grime, water, and debris from entering the frame openings — a simple step that keeps the chassis cleaner on long rides and in wet conditions.\u003c\/p\u003e\n  \u003cp\u003eBecause the covers snap into the existing holes, no drilling or permanent modification to the frame is required. Removal is equally straightforward, making them a reversible addition to the bike.\u003c\/p\u003e\n  \u003cp\u003eAt 35 mm across and finished in matte black, the covers sit flush with the frame tubes and complement the X Diavel's industrial aesthetic without drawing unnecessary attention.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole openings with a dry cloth to remove any dust or debris. Align each cover with its corresponding frame hole. Press firmly until the cover snaps fully into place. Repeat for all four positions. Inspect each cover to confirm it is seated flush and secure.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eX Diavel Logo\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eDucati X Diavel\u003c\/strong\u003e (2016+), \u003cstrong\u003eDucati X Diavel S\u003c\/strong\u003e (2016+), \u003cstrong\u003eDucati Diavel 1260\u003c\/strong\u003e (2019+) and \u003cstrong\u003eDucati Diavel 1260 S\u003c\/strong\u003e (2019+). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eDoes this kit include covers for all four frame holes?\u003c\/h3\u003e\n  \u003cp\u003eYes, the set includes four covers to fill all standard frame hole positions on the X Diavel and Diavel 1260.\u003c\/p\u003e\n  \u003ch3\u003eDo I need any tools to install these covers?\u003c\/h3\u003e\n  \u003cp\u003eNo tools are required — each cover snaps directly into the existing frame hole without drilling or modification.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every frame hole cover set is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58825261449597,"sku":null,"price":49.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_706e114e-b0a1-4775-91b5-10f28a788618.webp?v=1791211066"},{"product_id":"frame-hole-cap-set-for-ducati-monster-821-monster-1200-2014-to-2016","title":"Frame Hole Cap Set For Ducati Monster 821 \/ Monster 1200 - 2014 to 2016","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cap Set For Ducati Monster 821 \/ Monster 1200 - 2014 to 2016\u003c\/h2\u003e\n  \u003cp\u003eThe Ducati Monster \u003cstrong\u003eframe hole caps\u003c\/strong\u003e are designed to fill the exposed frame openings on the Monster 821 and Monster 1200\/S. Left bare from the factory, these holes collect road grime and detract from the finished look of the \u003cstrong\u003etrellis frame\u003c\/strong\u003e. These \u003cstrong\u003eABS plastic\u003c\/strong\u003e caps press into place without any tools or modifications, covering the gaps cleanly and adding a subtle logo detail that matches the engine displacement.\u003c\/p\u003e\n  \u003cp\u003eAvailable in two variants — 821 or 1200 logo — each set includes two caps sized to fit the specific mounting holes on the respective model year 2014 to 2016 Monster chassis.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole caps are made from ABS plastic, giving them enough rigidity to stay seated while remaining light enough not to affect balance or handling. At 0.1 kg for the set, they add no meaningful weight to the motorcycle.\u003c\/p\u003e\n  \u003cp\u003eInstallation requires no tools and no drilling. Each cap presses directly into the existing frame opening using the factory hole, making removal just as straightforward if needed. This is a reversible modification with no impact on the frame structure.\u003c\/p\u003e\n  \u003cp\u003eThe engraved logo — either 821 or 1200 — gives the finish a factory-style look rather than an aftermarket add-on. The caps complement the exposed trellis frame that defines the Monster's visual identity.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame holes and surrounding area to remove any dirt or grease. Select the correct cap for your model (821 or 1200 logo). Align each cap with the frame hole and press firmly until fully seated. Repeat for the second hole. No fasteners or adhesive required.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003e1200 Logo\u003c\/strong\u003e and \u003cstrong\u003e821 Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eDucati Monster 821\u003c\/strong\u003e (2014–2016), \u003cstrong\u003eDucati Monster 1200\u003c\/strong\u003e (2014–2016) and \u003cstrong\u003eDucati Monster 1200 S\u003c\/strong\u003e (2014–2016). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWhich variant fits my Monster 1200 S?\u003c\/h3\u003e\n  \u003cp\u003eChoose the 1200 Logo variant — it is listed as compatible with both the Monster 1200 and Monster 1200 S for model years 2014 to 2016.\u003c\/p\u003e\n  \u003ch3\u003eWhat is included in the set?\u003c\/h3\u003e\n  \u003cp\u003eEach set includes two ABS plastic frame hole caps with an engraved logo corresponding to your engine displacement.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eEvery order ships free, and each set is backed by a 1-year warranty against defects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"1200","offer_id":58825378595197,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true},{"title":"821","offer_id":58825378627965,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_59d519cb-9ea4-4c92-8130-60bf810318e9.webp?v=1791206303"},{"product_id":"frame-hole-cover-cap-set-for-ducati-scrambler-800-scrambler-400-2013-to-2020","title":"Frame Hole Cover Cap Set For Ducati Scrambler 800 \/ Scrambler 400 - 2013 to 2020","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eDucati Scrambler\u003c\/strong\u003e leaves several frame holes exposed from the factory — openings left by manufacturing or removed accessories that collect road grime and detract from an otherwise clean silhouette. This set of six \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e snaps directly into those openings, sealing them against dirt and moisture while giving the frame a finished look.\u003c\/p\u003e\n\u003cp\u003eMade from \u003cstrong\u003eABS plastic\u003c\/strong\u003e in a matte black finish, the caps are molded with ribbed edges that grip the frame holes securely without adhesive or fasteners. The set covers all standard open ports on the \u003cstrong\u003eScrambler 800\u003c\/strong\u003e and \u003cstrong\u003eScrambler 400\u003c\/strong\u003e frame from 2013 through 2020.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eThe frame hole cover caps seal exposed frame openings that would otherwise trap mud, water, and road debris. Keeping those cavities closed reduces the risk of corrosion building up inside the frame tubes over time.\u003c\/p\u003e\n\u003cp\u003eInstallation requires no tools and no drilling. Each cap presses firmly into its corresponding hole using molded ribbed tabs that grip the inner wall of the frame opening, making removal equally straightforward if needed.\u003c\/p\u003e\n\u003cp\u003eAt a combined weight of 0.2 kg for the full \u003cstrong\u003eset of 6\u003c\/strong\u003e, the caps add virtually no mass to the motorcycle. The uniform matte black finish matches the Scrambler's frame color and integrates cleanly with the bike's exposed-trellis aesthetic.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean each frame opening with a dry cloth to remove any dirt or debris. Align the cap with the opening, ribbed side facing inward. Press firmly until the ribbed edges grip the inner wall of the frame hole and the cap sits flush. Repeat for all six openings.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eBlack \/ Set of 6\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eDucati Scrambler 800\u003c\/strong\u003e (2013–2020) and \u003cstrong\u003eDucati Scrambler 400\u003c\/strong\u003e (2013–2020). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eDoes this set cover all the open frame holes on the Scrambler 800 and 400?\u003c\/h3\u003e\n\u003cp\u003eYes, the set includes 6 caps sized to cover the standard exposed frame openings on the Ducati Scrambler 800 and Scrambler 400 from 2013 to 2020.\u003c\/p\u003e\n\u003ch3\u003eDo I need any tools or adhesive to install these caps?\u003c\/h3\u003e\n\u003cp\u003eNo tools or adhesive are required — each cap presses directly into the frame hole using its ribbed edges to hold securely in place.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eThis set ships free and is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58825493971325,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_f0d4c4cb-d20c-49f1-89bb-919b2b1d4ecd.webp?v=1791211206"},{"product_id":"frame-hole-cover-caps-for-ducati-748-916-996-998-1994-to-2004","title":"Frame Hole Cover Caps For Ducati 748 \/ 916 \/ 996 \/ 998 - 1994 to 2004","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover Caps For Ducati 748 \/ 916 \/ 996 \/ 998 - 1994 to 2004\u003c\/h2\u003e\n  \u003cp\u003eThe \u003cstrong\u003eDucati 748\u003c\/strong\u003e, 916, 996, and 998 share a \u003cstrong\u003etrellis frame\u003c\/strong\u003e with open tube ends that collect dirt and moisture over time. These \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e press directly into those openings, blocking debris and giving the frame a finished appearance without any modification.\u003c\/p\u003e\n  \u003cp\u003eMade from plastic, the caps are lightweight and unobtrusive. They install by hand in seconds and can be removed just as easily, making them a straightforward upgrade for any owner who wants a tidier look under the fairing.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole cover caps seal the open tube ends of the Ducati trellis frame, preventing road grime and water from entering the frame structure. This keeps the interior of the frame tubes cleaner over the long term.\u003c\/p\u003e\n  \u003cp\u003eBecause the caps are press-fit, no tools are needed during installation or removal. Owners who regularly service their bikes can pull them out and refit them without any risk of damage to the frame or the caps themselves.\u003c\/p\u003e\n  \u003cp\u003eThe black finish blends cleanly with the frame finish on all four compatible models, maintaining the factory look of the bike while eliminating the unfinished appearance of bare open tube ends.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame tube openings to remove any dirt or grease. Align each cap with the corresponding opening. Press each cap firmly by hand until it seats flush with the frame tube end. Inspect each cap to confirm it sits securely and flush.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eDucati 916\u003c\/strong\u003e (1994–1998), \u003cstrong\u003eDucati 748\u003c\/strong\u003e (1995–2002), \u003cstrong\u003eDucati 996\u003c\/strong\u003e (1999–2001) and \u003cstrong\u003eDucati 998\u003c\/strong\u003e (2002–2004). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eWhich Ducati models do these frame caps fit?\u003c\/h3\u003e\n  \u003cp\u003eThese caps are listed for the Ducati 916 (1994–1998), 748 (1995–2002), 996 (1999–2001), and 998 (2002–2004).\u003c\/p\u003e\n  \u003ch3\u003eDo these require any tools to install?\u003c\/h3\u003e\n  \u003cp\u003eNo — the caps are press-fit and install by hand directly into the open frame tube ends.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every product is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58833159520637,"sku":null,"price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_8e7bd18e-03b5-4daa-ad4b-09877896c715.webp?v=1791212813"},{"product_id":"frame-hole-caps-for-ducati-monster-797-scrambler-2017-to-2021","title":"Frame Hole Caps For Ducati Monster 797 \/ Scrambler - 2017 to 2021","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Caps For Ducati Monster 797 \/ Scrambler - 2017 to 2021\u003c\/h2\u003e\n  \u003cp\u003eThese \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are designed to fill the open tube ends on the \u003cstrong\u003eDucati Monster 797\u003c\/strong\u003e and \u003cstrong\u003eScrambler Desert Sled\u003c\/strong\u003e frame. Left exposed from the factory, those holes collect dirt and moisture over time. The caps press directly into the frame tubes with no tools or hardware needed.\u003c\/p\u003e\n  \u003cp\u003eAvailable in three variants — Monster Logo, Scrambler Logo, and plain No Logo — they let you keep the frame looking intentional rather than unfinished. The black plastic construction blends with the \u003cstrong\u003etrellis frame\u003c\/strong\u003e on both models.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eThe frame hole cover caps seal open chassis tube ends against road grime, water, and debris. Keeping moisture out of the frame tubes helps prevent corrosion over the long term, particularly on bikes ridden in wet conditions.\u003c\/p\u003e\n  \u003cp\u003eInstallation takes under a minute per cap. Each cover presses firmly into the frame opening and stays in place without adhesive or fasteners, making removal just as straightforward if you ever need access to the tubes.\u003c\/p\u003e\n  \u003cp\u003eThree logo options let you match the cap style to your specific model. The Monster Logo variant suits the 797 roadster, the Scrambler Logo fits the Desert Sled, and the No Logo version works on either bike or any custom build where a clean look is preferred.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame tube openings with a dry cloth to remove any dirt or grease. Align each cap with its corresponding frame hole. Press each cap firmly into the opening until it seats flush with the frame surface. Repeat for all four caps.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eMonster Logo\u003c\/strong\u003e, \u003cstrong\u003eNo Logo\u003c\/strong\u003e and \u003cstrong\u003eScrambler Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eDucati Monster 797\u003c\/strong\u003e (2017–2021) and \u003cstrong\u003eDucati Scrambler Desert Sled\u003c\/strong\u003e. Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe set includes 4 frame hole cover caps.\u003c\/p\u003e\n  \u003ch3\u003eDo these caps fit both the Monster 797 and the Scrambler Desert Sled?\u003c\/h3\u003e\n  \u003cp\u003eYes — the Monster Logo variant is designed for the Monster 797 (2017-2021), the Scrambler Logo for the Desert Sled, and the No Logo option fits either model.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58833449943421,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_2e5ec77e-3b23-449e-9c9a-457aa6d87d9a.webp?v=1791213089"},{"product_id":"frame-hole-cover-caps-for-kawasaki-z500-ninja-500-2023-to-2026","title":"Frame Hole Cover Caps For Kawasaki Z500 \/ Ninja 500 - 2023 to 2026","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n  \u003ch2\u003eFrame Hole Cover Caps For Kawasaki Z500 \/ Ninja 500 - 2023 to 2026\u003c\/h2\u003e\n  \u003cp\u003eThese \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are designed to plug the unused access holes found in the frame of the \u003cstrong\u003eKawasaki Z500\u003c\/strong\u003e and \u003cstrong\u003eNinja 500\u003c\/strong\u003e. Left open from the factory, those holes collect road grime and moisture, and give the frame an unfinished look. The caps press directly into the openings with no tools required, restoring a clean, uniform appearance along the frame rails.\u003c\/p\u003e\n  \u003cp\u003eThe caps are finished in black to blend with the OEM frame and are visible in the lower frame area, as shown in the product photo. Install takes only seconds per cap.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n  \u003cp\u003eFrame hole cover caps keep road debris and moisture out of the open cavities in the chassis. On everyday rides, exposed frame holes act as collection points for dirt and water that can be difficult to clean — sealing them simplifies maintenance and keeps the frame looking tidy.\u003c\/p\u003e\n  \u003cp\u003eThe \u003cstrong\u003epress-fit\u003c\/strong\u003e design means no drilling, no adhesive, and no permanent modification to your Z500 or Ninja 500. The caps seat firmly into the existing openings and can be removed just as easily if access is needed later.\u003c\/p\u003e\n  \u003cp\u003eWith a \u003cstrong\u003eblack finish\u003c\/strong\u003e that closely matches the factory frame color, the frame hole cover caps deliver a factory-finished look without any visible hardware. It is a straightforward upgrade that most riders will notice only in its absence.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eBolt-on fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame hole opening and surrounding area with a dry cloth to remove any dirt or oil. Align the cap with the frame hole, ribbed side inward. Press the cap firmly into the hole until it seats flush with the frame surface. Repeat for each remaining hole.\u003c\/p\u003e\n  \u003cp\u003eAvailable in \u003cstrong\u003eBlack\u003c\/strong\u003e.\u003c\/p\u003e\n\n  \u003ch2\u003eFitment\u003c\/h2\u003e\n  \u003cp\u003eThis part is listed for \u003cstrong\u003eKawasaki Z500\u003c\/strong\u003e (2023–2026) and \u003cstrong\u003eKawasaki Ninja 500\u003c\/strong\u003e (2023–2026). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\n  \u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n  \u003ch3\u003eHow many caps are included in the set?\u003c\/h3\u003e\n  \u003cp\u003eThe exact quantity per set is not specified in the listing — please check with us before ordering if you need to cover a specific number of holes.\u003c\/p\u003e\n  \u003ch3\u003eDo these caps require any tools or adhesive to install?\u003c\/h3\u003e\n  \u003cp\u003eNo tools or adhesive are needed. The caps press directly into the existing frame openings and hold securely by friction.\u003c\/p\u003e\n\n  \u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set of frame hole cover caps is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58833726505341,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/wmremove-transformed_5_806c7d02-491c-4f64-86b2-65fc978acd4b.webp?v=1791213431"}],"url":"https:\/\/leananglemoto.com\/collections\/frame-plugs-caps.oembed","provider":"Lean Angle","version":"1.0","type":"link"}