{"title":"Honda XL750 Transalp Parts \u0026 Accessories","description":null,"products":[{"product_id":"crash-bar-engine-guard-for-honda-xl750-transalp-2023-to-2025","title":"Crash Bar Engine Guard For Honda XL750 Transalp - 2022 to 2025","description":"\u003cdiv class=\"pd pd--epp\"\u003e\n\u003ch2\u003eCrash Bar Engine Guard For Honda XL750 Transalp - 2023 to 2025\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003ecrash bar engine guard\u003c\/strong\u003e is built for the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e (2023 to 2025) and mounts directly to the frame to shield the engine cases, radiator, and lower fairings from tip-overs, gravel, and minor drops.\u003c\/p\u003e\n\u003cp\u003eConstructed from \u003cstrong\u003ealuminum alloy\u003c\/strong\u003e tubing, the guard adds a durable layer of protection without changing the stance or handling of the bike. It uses the factory frame mounting points, keeping the stock geometry intact.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eThe crash bar engine guard wraps around the lower frame rails, giving the Honda XL750 Transalp extra coverage where drops and low-speed tip-overs do the most damage.\u003c\/p\u003e\n\u003cp\u003eAluminum alloy construction keeps the guard light while still standing up to trail debris, curb strikes, and the occasional off-road spill.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrame-mounted protection\u003c\/strong\u003e preserves the factory mounting points, so the guard bolts on without altering the original geometry of the Transalp.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSupport the motorcycle on a stand so the front end is stable and off the ground.\u003c\/li\u003e\n\u003cli\u003eRemove the factory frame caps or lower fairing screws at the marked mounting points.\u003c\/li\u003e\n\u003cli\u003ePosition the crash bar against the frame rails, aligning the mounting holes.\u003c\/li\u003e\n\u003cli\u003eThread in the supplied bolts by hand at each mounting point before final tightening.\u003c\/li\u003e\n\u003cli\u003eTorque all bolts to the manufacturer's frame bolt specification.\u003c\/li\u003e\n\u003cli\u003eRecheck fitment and confirm clearance around the engine and exhaust before riding.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable class=\"pd-compat\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003e\u003cbr\u003e\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003e\u003cbr\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther\u003c\/td\u003e\n\u003ctd\u003eXL750 Transalp\u003c\/td\u003e\n\u003ctd\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd\u003e2022–2025\u003c\/td\u003e\n\u003ctd\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp class=\"pd-compat-note\"\u003ePlease double-check your model year and trim before ordering.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eThis crash bar engine guard ships free and is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58715836318077,"sku":null,"price":329.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/desc_17.jpg?v=1790011270"},{"product_id":"horn-cover-for-honda-xl750-transalp-2023","title":"Horn Cover For Honda XL750 Transalp - 2023 to 2027","description":"\u003ch2\u003eHorn Cover for \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e (2023–2025)\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003ehorn cover\u003c\/strong\u003e is a press-fit ABS plastic cover designed to fit directly over the factory horn housing on the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e, giving the horn mounting area a cleaner, more finished appearance than the stock bare metal unit provides. The stock horn on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e is a functional disc-type unit mounted in an exposed position at the front of the bike where it is visible from both the front and sides. This cover sits over that housing and integrates it more cohesively into the surrounding bodywork panels, replacing the utilitarian metal surface with a black ABS finish that reads as part of the front-end trim rather than an afterthought.\u003c\/p\u003e\n\u003cp\u003eThis is a cosmetic accessory. It does not change the function of the horn, does not affect the sound output, and does not interact with the electrical connections in any way. It is made for riders who want the front end of their \u003cstrong\u003eTransalp 750\u003c\/strong\u003e to have a more complete, finished look without leaving the bare metal horn housing visible against the surrounding black and bodywork-colored panels — not for those seeking a performance gain, because there is none to be had here.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eThe Stock Horn on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e uses a standard disc horn mounted at the front of the bike in a position that is functional and accessible but not styled to match the surrounding bodywork. The metal housing is utilitarian in design, which is entirely appropriate for its purpose as a safety device, but the contrast between the bare unit and the bodywork panels around it is visible from in front of and alongside the bike. This is a common detail on adventure and dual-sport motorcycles, where the horn is typically positioned for access and heat management rather than for visual integration with the surrounding trim.\u003c\/p\u003e\n\u003cp\u003eFitting a cover over the horn housing does not change the position, the wiring, or the horn itself — it simply provides a surface that matches the surrounding trim rather than contrasting with it. The effect is a front end that reads as more cohesive when the bike is clean and viewed up close, and it is most noticeable when the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e is observed from the front at short range, where the horn housing would otherwise draw the eye against the darker panels that frame it.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eMaterial and Finish\u003c\/h2\u003e\n\u003cp\u003eThe cover is manufactured from \u003cstrong\u003eblack ABS plastic\u003c\/strong\u003e, which matches the darker trim panels used throughout the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e's bodywork. The black surface does not require painting or finishing before fitting and is UV-stable enough to maintain its color in outdoor conditions without fading noticeably over multiple riding seasons. ABS is the standard material used for motorcycle bodywork panels across all major manufacturers because it is impact-resistant, lightweight, and holds its shape reliably under the temperature cycling that bodywork components experience in normal road use.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFitment and Installation — \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e 2023–2025\u003c\/h2\u003e\n\u003cp\u003eThe cover is designed specifically for the horn housing position on the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e produced from 2023 onward, and \u003cstrong\u003efits all model years from 2023 through 2025\u003c\/strong\u003e. It uses a press-fit or clip-on attachment mechanism that engages with the existing horn housing geometry without requiring tools, drilling, or any modification to the horn or its mounting hardware. Installation takes a few minutes and is fully reversible — the cover can be removed by hand without leaving any mark on the horn housing or the surrounding bodywork.\u003c\/p\u003e\n\u003cp\u003eNo disassembly of the front bodywork panels is required to fit the cover. The horn on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e is accessible from the front of the bike and the cover fits directly over the exposed housing without disturbing the panels around it. The wiring connections to the horn remain completely undisturbed throughout the fitting process, and the horn continues to operate normally once the cover is in place.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes it affect the sound output of the horn?\u003c\/h3\u003e\n\u003cp\u003eNo. The cover fits over the outside of the horn housing and does not obstruct the sound-emitting face of the horn disc. The horn continues to function and produce sound at the same level as the factory unit with the cover in place. This is a cosmetic cover, not a horn enclosure, and its fit does not seal or muffle the horn output in any meaningful way.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the \u003cstrong\u003eTransalp 750\u003c\/strong\u003e in all color variants?\u003c\/h3\u003e\n\u003cp\u003eYes. The cover is black ABS and is designed to fit the horn housing on all \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e color variants produced from 2023 to 2025. The horn mounting position and housing geometry are consistent across all color and specification variants of the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e produced in these model years, and the black finish is compatible with the trim palette across the full range of \u003cstrong\u003eTransalp 750\u003c\/strong\u003e color options.\u003c\/p\u003e\n\u003ch3\u003eCan it be removed once fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The press-fit or clip-on attachment is designed to be fully removable by hand without tools and without leaving any mark on the horn housing or surrounding bodywork. The cover can be refitted as many times as needed, and the horn underneath is completely unaffected by the process of fitting and removing it.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58754018574717,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_d2974db4-4cc8-4419-a0fb-81be34204666_1.webp?v=1790375703"},{"product_id":"radiator-guard-for-honda-xl750-transalp-2024-to-2027","title":"Radiator Guard For Honda XL750 Transalp - 2024 to 2027","description":"\u003ch2\u003eRadiator Guard for \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e (2024–2027)\u003c\/h2\u003e\n\n\u003cp\u003eThis \u003cstrong\u003eradiator guard\u003c\/strong\u003e is a purpose-built protective grille that mounts directly in front of the radiator on the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e and intercepts stone chips, gravel, and trail debris before they can reach and deform the radiator fins. Designed specifically for the Transalp's radiator geometry, it is produced to a standard that matches the quality of the bike it fits — this is not a generic mesh insert trimmed to approximate size, but a guard engineered for this application from the ground up.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e is used for the kind of riding that puts the radiator at continuous risk. Long-distance touring that includes gravel roads, unpaved mountain passes, and mixed-surface tracks is exactly what this bike was built for, and that use case means the radiator faces consistent exposure to debris that a road-only machine would never encounter. On sealed roads, material thrown by other vehicles is a persistent hazard at motorway speeds; on gravel, stone chips are unavoidable and travel directly toward the radiator in the slipstream. Without a guard, the fin damage from this exposure accumulates across a touring season into a meaningful reduction in cooling capacity.\u003c\/p\u003e\n\n\u003cp style=\"text-align:center\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/transalpradiatorguard_1.jpg?v=1790375053\" alt=\"Radiator Guard Honda XL750 Transalp\" style=\"max-width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eRadiator Fin Damage and Long-Distance Touring\u003c\/h2\u003e\n\n\u003cp\u003eThe aluminium cooling fins on a liquid-cooled motorcycle radiator are typically 0.1–0.15mm thick and spaced 2–3mm apart — optimised for heat transfer, not impact resistance. A single stone at speed is enough to permanently bend several adjacent fins flat against the core, and that damage cannot be reversed without removing and professionally repairing the radiator. Deformed fins create a dead zone where air cannot pass through, reducing the effective cooling area available to the system.\u003c\/p\u003e\n\n\u003cp\u003eOn a bike used for extended touring in warm climates, that reduced capacity can raise operating temperature during slow mountain climbs or sustained highway riding in summer heat. The effect is not immediate, but it is cumulative — each gravel section adds incrementally to the damage until the reduction in cooling area becomes large enough to affect the system under load. \u003cstrong\u003eProtecting the fins from the outset is significantly more cost-effective than repairing or replacing a damaged radiator core\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e's radiator is positioned at the front of the bike in a configuration that maximises airflow at speed but offers no protection from forward-travelling debris. This is the correct engineering trade-off for a bike designed to run efficiently at touring speeds, but it means the fins are directly exposed to any stone or gravel that enters the frontal envelope of the bike. \u003cstrong\u003eA guard that intercepts this debris before it reaches the fins addresses the problem without requiring any change to the airflow geometry\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp style=\"text-align:center\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/transalpradiatorguard_7.jpg?v=1790375055\" alt=\"Radiator Guard Honda XL750 Transalp\" style=\"max-width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eConstruction and Airflow\u003c\/h2\u003e\n\n\u003cp\u003eAt this price point, this guard is constructed from aluminium or stainless steel rather than ABS plastic, which means it holds its shape under repeated stone impact rather than eventually cracking or deforming over the course of a touring season. The mesh or grille aperture is sized to stop stones and gravel while allowing the majority of air to pass through to the radiator core — the guard does not create a sealed barrier between the ambient air and the fins, and it is not designed to do so.\u003c\/p\u003e\n\n\u003cp\u003eThe structural integrity of a metal guard also matters in off-road conditions where a branch or trail debris might make contact with it directly. A plastic guard in that situation can crack and fail, leaving the radiator unprotected; a metal guard deflects the impact and remains serviceable. \u003cstrong\u003eThe durability of the material is part of what justifies the price point, and it is the correct choice for a bike used on the kind of terrain the Transalp is designed for\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eUnder normal touring conditions — riding at speed with ambient air flowing through the guard — \u003cstrong\u003ethe temperature effect of the guard on the engine's operating temperature is not measurable in real-world use\u003c\/strong\u003e. The \u003cstrong\u003eTransalp\u003c\/strong\u003e's cooling system has sufficient margin to absorb the marginal airflow reduction a guard introduces without consequence. In the most demanding conditions — slow technical off-road riding in high ambient temperatures — a slight temperature increase is possible but remains within the system's operating parameters.\u003c\/p\u003e\n\n\u003cp style=\"text-align:center\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/transalpradiatorguard_2.jpg?v=1790375054\" alt=\"Radiator Guard Honda XL750 Transalp\" style=\"max-width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFitment and Installation — \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e 2024–2027\u003c\/h2\u003e\n\n\u003cp\u003eThis guard is designed specifically for the radiator dimensions and mounting interface of the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e produced from 2024 onward. It uses the existing radiator mounting hardware alongside the supplied fasteners and does not require drilling into the frame or bodywork at any point. \u003cstrong\u003eInstallation takes approximately 20–30 minutes with basic hand tools\u003c\/strong\u003e and is fully reversible, leaving no permanent modification to the bike.\u003c\/p\u003e\n\n\u003cp\u003eThe guard covers the full face of the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e radiator and is designed to align correctly with the surrounding bodywork panels without requiring shimming or adjustment. The fitment is model-specific rather than universal, which means it matches the Transalp's radiator geometry precisely and does not leave uncovered sections at the edges where stones could still enter from the sides — a common shortcoming of universal guards applied to this bike.\u003c\/p\u003e\n\n\u003cp style=\"text-align:center\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/transalpradiatorguard_3.jpg?v=1790375053\" alt=\"Radiator Guard Honda XL750 Transalp\" style=\"max-width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWill it raise the engine operating temperature?\u003c\/h3\u003e\n\n\u003cp\u003eUnder normal touring conditions the temperature effect is not significant. The guard is designed to allow the majority of airflow to reach the radiator core, and the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e's cooling system has sufficient headroom to handle the marginal restriction the guard introduces. In sustained slow off-road riding in very high ambient temperatures a slight increase is theoretically possible, but this falls within the design parameters of the system and the type of use the Transalp is built to accommodate.\u003c\/p\u003e\n\n\u003ch3\u003eIs this a universal guard or model-specific?\u003c\/h3\u003e\n\n\u003cp\u003eThis guard is designed specifically for the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e (2024–2027) and is not a universal fitment. The dimensions and mounting points are matched to the Transalp's radiator geometry, which means it fits correctly without modification and covers the full radiator face rather than a portion of it. Universal guards require trimming and often leave exposed edges where debris can still reach the fins — this one does not.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with all the hardware needed for installation?\u003c\/h3\u003e\n\n\u003cp\u003eYes. The guard is supplied with all fasteners required to complete the installation on the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e. No additional hardware needs to be sourced separately, and no existing fasteners from the radiator mounting need to be permanently replaced — the supplied hardware works with the existing mounting points without modification, keeping the installation clean and the process straightforward.\u003c\/p\u003e","brand":"Lean Angle","offers":[{"title":"Default Title","offer_id":58754029650301,"sku":null,"price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/transalpradiatorguard_1.jpg?v=1790375053"},{"product_id":"headlight-protector-for-honda-transalp-xl-750-2023-2024","title":"Headlight Guard Protector for Honda Transalp XL 750 - 2022 to 2025","description":"\u003ch2\u003eCNC Headlight Protector for \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e (2023–2024)\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eCNC headlight protector\u003c\/strong\u003e is a machined aluminium grille that mounts directly over the front headlight of the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e and intercepts stone chips, gravel, branch strikes, and off-road debris before they can reach the headlight lens. It is designed specifically for the Transalp's headlight geometry and produced from aluminium with a quality of fit and finish appropriate to a motorcycle at this price point. At $99.90, it is a straightforward piece of protective hardware engineered to do one job reliably.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e uses a stacked LED headlight unit that functions as both a primary lighting component and one of the bike's defining design features. It is positioned at the very front of the motorcycle in a forward-facing orientation that offers no natural protection from debris during riding. On gravel roads, forest tracks, and unpaved mountain passes — exactly the terrain \u003cstrong\u003eTransalp\u003c\/strong\u003e owners use these bikes on — stone chips and branch strikes are routine events, and the polycarbonate lens that protects the LED array is not designed to withstand direct impact from road debris at speed.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eThe Cost of a Cracked Headlight\u003c\/h2\u003e\n\u003cp\u003eA cracked or shattered headlight lens on a modern motorcycle with an integrated LED assembly is not the straightforward repair it would have been on a bike with a replaceable bulb and a separate reflector housing. On the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e, the headlight is a sealed multi-function unit that integrates the LED array, the DRL ring, and the position light in a single assembly. Replacing it means sourcing a Honda OEM unit or an aftermarket equivalent, both of which are significantly more expensive than the cost of this guard. The guard's cost is effectively recovered on the first stone chip event that would otherwise have resulted in a lens replacement.\u003c\/p\u003e\n\u003cp\u003eBeyond the direct parts cost, a cracked headlight on an adventure bike creates a practical problem in the field: the motorcycle may still be rideable, but the water ingress that follows a broken lens seal can damage the LED module and the housing electronics, turning what began as a cosmetic issue into an electrical one. \u003cstrong\u003eFitting a guard before any damage occurs eliminates both the repair cost and the inconvenience of a compromised headlight during a tour.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eCNC Aluminium Construction\u003c\/h2\u003e\n\u003cp\u003eThe guard is machined from aluminium billet and finished with an anodised or powder-coated surface treatment that resists corrosion and maintains its appearance through repeated exposure to rain, mud, and trail conditions. CNC machining produces a guard with precise aperture geometry and consistent wall thickness, which means it deflects debris reliably rather than flexing or deforming under impact. The aluminium construction also means the guard does not crack under the kind of sustained stone chip exposure that would eventually fatigue a plastic equivalent over a high-mileage touring season.\u003c\/p\u003e\n\u003cp\u003eThe aperture pattern in the grille is sized to intercept stones and trail debris while allowing the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e's headlight beam to project through without meaningful reduction in light output. \u003cstrong\u003eThe guard does not cause a visible difference in the headlight pattern at night\u003c\/strong\u003e, which is a practical consideration for riders who use these bikes for touring that includes riding after dark. The grille geometry is specific to the Transalp's headlight proportions rather than adapted from a universal design, so the proportions read correctly against the front-end of the bike.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/03_427600f8-7f81-418f-ab41-b7b5221ca3db.webp?v=1790376160\" alt=\"CNC Headlight Protector Honda XL750 Transalp\" style=\"max-width: 100%; height: auto; border-radius: 4px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFitment and Installation — \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e 2023–2024\u003c\/h2\u003e\n\u003cp\u003eThe guard mounts to the existing attachment points on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e's headlight housing using the supplied hardware. No drilling into the bodywork, no modification to the headlight assembly, and no changes to the electrical connections are required at any stage of installation. \u003cstrong\u003eInstallation takes approximately 15–20 minutes\u003c\/strong\u003e and is fully reversible — the guard can be removed and the headlight returned to standard specification at any time without leaving any trace of fitment.\u003c\/p\u003e\n\u003cp\u003eThe guard is designed for the 2023 and 2024 model year \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e and is a model-specific component rather than a universal guard adapted to fit. This means it aligns correctly with the headlight housing profile and integrates with the surrounding front-end bodywork without gaps or misalignment at the edges — a distinction that is immediately visible when comparing a purpose-made guard against a generic one on a bike with this level of front-end detailing.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/04_eeddb649-9c9e-4cfc-b4c9-9e4a2417d038.webp?v=1790376161\" alt=\"CNC Headlight Protector Honda XL750 Transalp\" style=\"max-width: 100%; height: auto; border-radius: 4px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill it reduce the headlight output noticeably?\u003c\/h3\u003e\n\u003cp\u003eThe aluminium grille does intercept a portion of the light emitted by the headlight, as any physical guard will. In practice, the reduction in perceived light output on the road is not significant because the apertures in the grille are sized to allow the majority of the beam to pass through unobstructed. Riders using the \u003cstrong\u003eTransalp 750\u003c\/strong\u003e on unlit roads will not find the guard creates a meaningful disadvantage relative to the protection it provides. That said, if maximum headlight output in all conditions is the priority above all other considerations, the guard should not be fitted.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the 2025 model year Transalp 750?\u003c\/h3\u003e\n\u003cp\u003eThis guard is listed for the 2023 and 2024 \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e. If the 2025 model year uses the same headlight housing and mounting interface as the 2023–2024 production run — which is the case for most mid-cycle updates on this platform — the guard is likely to fit, but this should be verified against the 2025 headlight mounting dimensions before ordering, as Honda may have updated the front-end specification for that model year.\u003c\/p\u003e\n\u003ch3\u003eIs it available in silver as well as black?\u003c\/h3\u003e\n\u003cp\u003eAvailability of anodised finishes depends on the variant listed at the time of purchase. The natural aluminium or silver anodised finish is the alternative to the black powder-coated version, and both use the same \u003cstrong\u003eCNC-machined aluminium construction\u003c\/strong\u003e and provide the same level of protection. The choice between them is a matter of whether the silver metallic finish or the black finish better suits the specific color scheme of the buyer's \u003cstrong\u003eTransalp 750\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58754042298749,"sku":null,"price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/03_62a1bdfc-ca58-4f17-8bd7-4abe08e26f68.webp?v=1790376067"},{"product_id":"frame-protector-for-honda-xl750-transalp-2023-2025","title":"Frame Protector for Honda XL750 Transalp - 2023 to 2025","description":"\u003ch2\u003eFrame Protector for \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e (2023–2025)\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eframe protector set\u003c\/strong\u003e for the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e is a set of formed ABS plastic panels that attach to the exposed frame sections of the Transalp and protect the frame finish from the scratches, scuffs, and paint damage that accumulate from normal use of an adventure motorcycle. The panels are cut and shaped to match specific frame sections on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e and attach directly to the frame without affecting the surrounding bodywork.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e is designed for use that consistently exposes the frame to physical contact: off-road sections where branches and debris reach the lower frame rails, loading and unloading luggage where straps and bags contact the frame, boot contact near the footpegs on every ride, and general handling where the frame is gripped or supported by hand. Without protection, these contact points accumulate scratches and chips that are permanent in the paint and, on steel sections, can break through to bare metal and initiate surface corrosion over time.\u003c\/p\u003e\n\n\u003cp style=\"text-align:center\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_38efbd13-ee86-48d5-916d-53017c20988c.webp?v=1790377015\" alt=\"Frame Protector Honda XL750 Transalp\" style=\"max-width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFrame Wear Points on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp\u003eThe main frame tubes on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e run alongside and below the side panels in sections that are partially visible and directly accessible from outside the bike. The lower sections of the main frame are exposed to boot contact every time the rider mounts or dismounts, and to chain slap in the swingarm area under hard acceleration or rough terrain. The subframe sections that carry the rear seat and luggage rack receive direct contact from luggage straps and bags every time the bike is loaded for touring.\u003c\/p\u003e\n\n\u003cp\u003eThese contact points are not a design flaw — they are an inevitable consequence of building an adventure motorcycle that is compact, accessible, and capable of carrying luggage. The \u003cstrong\u003eframe protector panels address the consequence\u003c\/strong\u003e by covering the most affected sections before the damage accumulates, rather than after the frame finish has been compromised. A set of protectors fitted from new keeps the frame in the same condition whether the bike has 500 miles or 15,000 miles on it.\u003c\/p\u003e\n\n\u003cp style=\"text-align:center\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/02_31b9b0ce-5577-45b1-9ed2-c5f50e2766d0.webp?v=1790377015\" alt=\"Frame Protector Honda XL750 Transalp\" style=\"max-width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eMaterial and Fit\u003c\/h2\u003e\n\n\u003cp\u003eThe protectors are manufactured from \u003cstrong\u003eABS plastic\u003c\/strong\u003e, the same material used for the surrounding bodywork panels on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e. ABS is impact-resistant and flexible enough to conform to the curved sections of the frame without cracking under load. The black finish is UV-stable and does not require painting or coating to maintain its appearance in outdoor conditions across multiple riding seasons.\u003c\/p\u003e\n\n\u003cp\u003eThe panels are cut to match the geometry of the specific frame sections they cover on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e, which means they sit flush against the frame without gaps at the edges and without requiring trimming during installation. The fit is model-specific rather than adapted from a universal template, so the profile follows the \u003cstrong\u003eTransalp\u003c\/strong\u003e's frame contours correctly and does not stand proud of or below the adjacent bodywork by a visible margin.\u003c\/p\u003e\n\n\u003cp style=\"text-align:center\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/03_c48329c6-8606-4b10-9a8a-56c143fd8595.webp?v=1790377015\" alt=\"Frame Protector Honda XL750 Transalp\" style=\"max-width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eInstallation — \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e 2023–2025\u003c\/h2\u003e\n\n\u003cp\u003eThe protectors attach to the frame using self-adhesive backing, clip-on brackets, or a combination of both, depending on the section being covered. The adhesive sections require the frame surface to be cleaned and degreased before application to ensure full bond strength. \u003cstrong\u003eInstallation requires no tools and no modification to the frame or bodywork\u003c\/strong\u003e, and the full set can typically be fitted in under 30 minutes on a first installation.\u003c\/p\u003e\n\n\u003cp\u003eThe panels are removable if required, though the adhesive-backed sections leave the frame clean when removed carefully using a heat gun on a low setting to soften the adhesive before peeling. The frame surface beneath is unaffected provided the paint was in sound condition before the protector was applied. The protectors cover all \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e variants produced from 2023 through 2025.\u003c\/p\u003e\n\n\u003cp style=\"text-align:center\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/04_7dea5169-6d6f-45c6-8fb3-728d954662a8.webp?v=1790377019\" alt=\"Frame Protector Honda XL750 Transalp\" style=\"max-width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eDoes the set cover the swingarm as well as the main frame?\u003c\/h3\u003e\n\n\u003cp\u003eCoverage varies by kit configuration. Most \u003cstrong\u003eframe protector sets\u003c\/strong\u003e for the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e cover the main frame rails, the lower sections near the footpegs, and the subframe sections behind the seat. Swingarm protection may be included as a separate panel or as part of the full kit depending on the variant. The product images show the specific panels included in this set and the frame sections they cover.\u003c\/p\u003e\n\n\u003ch3\u003eWill the adhesive damage the frame paint when removed?\u003c\/h3\u003e\n\n\u003cp\u003eQuality 3M-type adhesive removed correctly — by warming the adhesive with a heat gun on a low setting and peeling slowly from one corner — does not damage sound paintwork. Paint that was already compromised before the protector was fitted, such as existing chips or a weakened clear coat, may react differently. The adhesive is designed to \u003cstrong\u003ehold the panel securely through heat, vibration, and weather\u003c\/strong\u003e without bonding permanently to the substrate.\u003c\/p\u003e\n\n\u003ch3\u003eAre these compatible with aftermarket frame sliders?\u003c\/h3\u003e\n\n\u003cp\u003eFrame protectors and frame sliders serve different purposes. Frame sliders protect the bike in the event of a fall by providing a contact point that slides rather than the frame itself, while \u003cstrong\u003eframe protectors protect the frame finish\u003c\/strong\u003e from the everyday contact and abrasion that occurs during normal use. Both can typically be fitted to the same bike without conflict, as they cover different areas and attach by different methods.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58754054291837,"sku":null,"price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_19c723eb-2251-4fd5-8574-fee27de9baf4.webp?v=1790376910"},{"product_id":"side-fairing-protector-for-honda-xl750-transalp-2024-2025","title":"Side Fairing Protector For Honda XL750 Transalp - 2024 to 2026","description":"\u003cp\u003eThis \u003cstrong\u003eside fairing protector\u003c\/strong\u003e is a set of formed ABS or TPU panels that attach directly to the side fairing sections of the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e and protect the painted surfaces from the contact marks, scuffs, and scratches that accumulate during normal use of an adventure motorcycle. The protectors are cut and shaped to match the \u003cstrong\u003eTransalp\u003c\/strong\u003e's fairing geometry precisely, sitting against the surfaces most exposed to routine contact without altering the profile of the bodywork.\u003c\/p\u003e\n\u003cp\u003eThe side fairings on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e are among the most contact-exposed body panels on the bike. The rider's right leg passes the right fairing panel on every mount and dismount, generating boot and trouser contact at the same point each time, while luggage bags and tank bags press against the side panels during loading and flex against them during riding. General handling — pushing the bike in confined spaces, or leaning it on the side stand on uneven ground — produces repeated contact at the lower fairing edges. Without protection, these contact zones develop permanent scuff marks in the ABS surface that no amount of polishing will remove.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_8feff155-383b-4db2-beda-572a9b9f6a74.jpg?v=1790378924\" alt=\"Side Fairing Protector Honda XL750 Transalp\" style=\"max-width: 100%; height: auto; border-radius: 4px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Fairing Scratches Are Permanent\u003c\/h2\u003e\n\u003cp\u003eABS plastic fairings are molded and painted as a composite surface, with color carried in a paint layer over the base material. Surface scratches that break through the clear coat and into the color coat cannot be polished out without removing paint from the surrounding area, and a scratch only a few millimeters wide is visible across a parking lot on a dark-colored panel. The \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e's side fairings are prominent enough that surface condition is immediately noticeable whenever the bike is clean.\u003c\/p\u003e\n\u003cp\u003eThe alternative to fitting a protector is to accept the gradual accumulation of contact marks across the fairing surface, or to have the panels resprayed — a cost that exceeds the price of a protector set many times over. \u003cstrong\u003eA fairing protector fitted before the first contact occurs means the contact marks go onto the protector rather than the paint\u003c\/strong\u003e, and the protector can be replaced if it becomes too scuffed, while the original fairing underneath remains in the same condition as the day the bike was new.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eMaterial and Fit\u003c\/h2\u003e\n\u003cp\u003eThe protectors are manufactured from \u003cstrong\u003eABS or TPU plastic\u003c\/strong\u003e in a black finish that sits against the fairing surface without drawing attention to itself. Both materials are flexible enough to conform to the curved fairing sections without cracking under the load of repeated contact, and UV-stable enough to maintain their color in outdoor conditions without fading or chalking over time.\u003c\/p\u003e\n\u003cp\u003eThe panels are cut to match the specific geometry of the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e's side fairing sections for the 2024 and 2025 model years, which means they align with the fairing surface correctly and do not stand proud of the surrounding bodywork in a way that catches clothing or luggage straps. A protector that does not fit the fairing profile correctly will peel at the edges prematurely and will not provide even coverage across the contact zone. \u003cstrong\u003eThe model-specific cut is what separates a purpose-made protector from a trimmed universal strip\u003c\/strong\u003e, and it is the reason the panels sit flat and stay in place through extended touring use.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation — \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e 2024–2025\u003c\/h2\u003e\n\u003cp\u003eThe protectors attach to the fairing surface using self-adhesive backing. Installation requires cleaning the fairing surface thoroughly with isopropyl alcohol to remove wax, polish, and road film, allowing the surface to dry completely, then peeling the backing and pressing each panel firmly into position from one edge across to the other to avoid trapping air. The adhesive reaches full bond strength within 24 hours, and the protectors should not be subjected to heavy contact or water during that curing period.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation requires no tools and takes approximately 10–15 minutes for the full set.\u003c\/strong\u003e The panels are removable by warming the adhesive with a heat gun on a low setting and peeling slowly from one corner, and the fairing surface beneath is unaffected provided the paint was in sound condition before the protector was applied. These protectors are listed for all \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e variants produced in the 2024 and 2025 model years.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/04_05ee42bb-1e99-4901-bb22-995f967dd19e.webp?v=1790378810\" alt=\"Side Fairing Protector Honda XL750 Transalp\" style=\"max-width: 100%; height: auto; border-radius: 4px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill the protector be visible against the fairing?\u003c\/h3\u003e\n\u003cp\u003eThe black finish of the protector panels matches the darker areas of the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e's color palette and is designed to be as unobtrusive as possible once fitted. On black or dark-colored fairings the protectors are barely visible and sit cleanly against the surface. On lighter fairing colors the contrast between the protector panel and the surrounding fairing will be more noticeable, which is a trade-off between protection and appearance that each buyer should weigh against their own priorities before ordering.\u003c\/p\u003e\n\u003ch3\u003eDo the protectors fit the 2023 model year Transalp 750 as well?\u003c\/h3\u003e\n\u003cp\u003eThese protectors are listed for the 2024 and 2025 \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e. Honda updated the side fairing design on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e for the 2024 model year, and the side panel contours on the 2024–2025 version differ from those on the 2023 model. Buyers with a 2023 \u003cstrong\u003eTransalp 750\u003c\/strong\u003e should verify the panel dimensions against their fairing before ordering, as the 2023 fairing profile may not match the cut of these protectors and an incorrect fit will result in edge lifting.\u003c\/p\u003e\n\u003ch3\u003eWhat happens to the fairing if the protector is removed?\u003c\/h3\u003e\n\u003cp\u003eQuality adhesive-backed protectors removed correctly leave the fairing surface clean and undamaged. The adhesive is formulated to bond firmly enough to prevent the panel from lifting at the edges during use, while still releasing cleanly from sound paintwork when the panel is warmed and peeled slowly from one corner. Any adhesive residue that remains on the fairing after removal can be cleaned away with isopropyl alcohol without affecting the paint finish beneath.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58754067399037,"sku":null,"price":89.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_8feff155-383b-4db2-beda-572a9b9f6a74.jpg?v=1790378924"},{"product_id":"frame-hole-cover-caps-for-honda-transalp-xl750-2023-to-2023","title":"Frame Hole Cover Caps For Honda Transalp XL750 - 2023 to 2027","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eFrame Hole Cover Caps For Honda Transalp XL750 - 2023 to 2027\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003eframe hole cover caps\u003c\/strong\u003e are designed specifically for the \u003cstrong\u003eHonda Transalp XL750\u003c\/strong\u003e (2023 and later). They press into the open frame tubes left exposed from the factory, giving the chassis a cleaner, finished appearance.\u003c\/p\u003e\n\u003cp\u003eAvailable in two versions — with a Transalp logo or plain — both caps snap into place without any tools or modifications. The \u003cstrong\u003eplastic construction\u003c\/strong\u003e keeps weight negligible while sealing the \u003cstrong\u003eframe opening\u003c\/strong\u003es against dirt and moisture.\u003c\/p\u003e\n\u003ch2\u003eWhy it makes a difference\u003c\/h2\u003e\n\u003cp\u003eThe frame hole cover caps block debris, water, and road grime from entering the open frame tubes on the Honda Transalp XL750. Keeping those cavities sealed helps protect the internal structure over time.\u003c\/p\u003e\n\u003cp\u003eInstallation takes seconds. Each cap presses directly into the existing frame opening with \u003cstrong\u003eno drilling\u003c\/strong\u003e, no adhesive, and no hardware required. Removal is equally straightforward if needed for service.\u003c\/p\u003e\n\u003cp\u003eThe logo variant adds a subtle branded touch to the frame area, while the plain version maintains a clean, understated look. Both options are finished in black to match the factory frame color.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-in fitment.\u003c\/strong\u003e No drilling, no cutting and no permanent modification to your motorcycle. Clean the frame opening of any dirt or debris. Align the cap with the frame hole. Press the cap firmly into place until it seats flush. Repeat for the second cap.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eWith Transalp Logo\u003c\/strong\u003e and \u003cstrong\u003eNo Logo\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis part is listed for \u003cstrong\u003eHonda Transalp XL750\u003c\/strong\u003e (2023+). Check your model year and trim against the list above before ordering.\u003c\/p\u003e\n\u003ch2\u003eQuestions riders ask\u003c\/h2\u003e\n\u003ch3\u003eWill these caps fit the Honda Transalp XL750 2023?\u003c\/h3\u003e\n\u003cp\u003eYes, these caps are designed specifically for the Honda Transalp XL750 2023 and later models.\u003c\/p\u003e\n\u003ch3\u003eDo I need any tools to install these frame caps?\u003c\/h3\u003e\n\u003cp\u003eNo tools are required — each cap presses directly into the frame hole and seats flush without drilling or hardware.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eEnjoy free shipping on your order, and every set is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58808509628797,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/general_01_1eea3943-fdbd-43d5-9438-6eec42ad42d4.webp?v=1791027175"},{"product_id":"rear-brake-reservoir-guard-for-honda-xl750-transalp-2023-to-2024","title":"Rear Brake Reservoir Guard For Honda XL750 Transalp - 2023 to 2024","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eShield The Transalp's Rear Brake Reservoir\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003erear brake reservoir guard\u003c\/strong\u003e fits the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e (2023–2024). It covers the rear brake fluid reservoir on the right side of the bike.\u003c\/p\u003e\n\u003cp\u003eIt is laser-cut and CNC-bent from 2 mm \u003cstrong\u003e6061-T6 aluminum\u003c\/strong\u003e, anodized black, with a laser-printed logo.\u003c\/p\u003e\n\u003ch2\u003eWhy it matters\u003c\/h2\u003e\n\u003cp\u003eThe rear reservoir sits low and exposed, where boots, stones and a tip-over can crack it. A cracked reservoir means lost brake fluid and a rear brake you cannot trust.\u003c\/p\u003e\n\u003cp\u003eA \u003cstrong\u003ereservoir guard\u003c\/strong\u003e protects it from impacts and gives the area a clean, finished look. The black anodized finish matches the Transalp's frame and resists corrosion from road salt, rain and pressure washing.\u003c\/p\u003e\n\u003cp\u003eIt is a small, inexpensive part that saves you from a roadside repair far from home, which matters on a bike built for long adventure trips.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is easy and requires no cutting or drilling. No instructions are included.\u003c\/p\u003e\n\u003cp\u003eFit the guard over the reservoir using the existing mounting point and tighten. Do not open the reservoir during installation.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable class=\"pd-fitment\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eXL750 Transalp\u003c\/td\u003e\n\u003ctd\u003e2023-2024\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFitment is listed exactly as stated by the manufacturer. Check your model and year against the table before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1 rear brake reservoir guard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance tip:\u003c\/strong\u003e check the brake fluid level through the reservoir window regularly and replace the fluid every two years, or as specified in your owner's manual.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure it fits?\u003c\/strong\u003e Compare your bike with the photos and the compatibility table before ordering. If you still have a doubt, contact us with your model, year and a photo of the original part, and we will help you confirm the right fit.\u003c\/p\u003e\n\u003cp\u003eExplore all our \u003ca href=\"\/en-ch\/collections\/honda-xl750-transalp-parts-accessories\"\u003eHonda XL750 Transalp parts and accessories\u003c\/a\u003e, browse the full range of \u003ca href=\"\/en-ch\/collections\/brake-reservoir-guards\"\u003ebrake reservoir guards\u003c\/a\u003e, or shop every \u003ca href=\"\/en-ch\/collections\/honda-motorcycle-parts-accessories\"\u003eHonda motorcycle accessory\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every reservoir guard is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"2023-2024","offer_id":58882197291389,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/Se5fc8e29b4c747ad82087d9d90d745dem.webp?v=1791881422"},{"product_id":"handguards-for-honda-xl750-transalp-2023-to-2024","title":"Handguards For Honda XL750 Transalp - 2023 to 2024","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eKeep Your Hands Protected On The Transalp\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003ehandguards\u003c\/strong\u003e fit the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e (2023–2024). They protect your hands and levers from branches, stones and cold wind.\u003c\/p\u003e\n\u003cp\u003eThey are molded from \u003cstrong\u003eABS plastic\u003c\/strong\u003e, weigh 0.6 kg for the pair and come in black, red or white.\u003c\/p\u003e\n\u003ch2\u003eWhy it matters\u003c\/h2\u003e\n\u003cp\u003eOn trails, a branch or a fall can bend a lever or hurt your fingers. \u003cstrong\u003eHand guards\u003c\/strong\u003e deflect brush and stones before they reach your hands and controls.\u003c\/p\u003e\n\u003cp\u003eOn the highway they also cut wind blast and cold air on your hands, which reduces fatigue on long days and makes riding in cool weather more comfortable.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and leaves enough room for the brake and clutch lines and switchgear.\u003c\/p\u003e\n\u003cp\u003eMount each guard to the handlebar using the supplied hardware, adjust the angle and tighten. Turn the bars lock to lock to check that nothing binds.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable class=\"pd-fitment\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eXL750 Transalp\u003c\/td\u003e\n\u003ctd\u003e2023-2024\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFitment is listed exactly as stated by the manufacturer. Check your model and year against the table before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1 pair of handguards (left and right) with hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSetup tip:\u003c\/strong\u003e position the guards so the levers can travel fully and the bars turn lock to lock without touching the tank or fairing, then tighten the clamps evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure it fits?\u003c\/strong\u003e Compare your bike with the photos and the compatibility table before ordering. If you still have a doubt, contact us with your model, year and a photo of the original part, and we will help you confirm the right fit.\u003c\/p\u003e\n\u003cp\u003eExplore all our \u003ca href=\"\/en-ch\/collections\/honda-xl750-transalp-parts-accessories\"\u003eHonda XL750 Transalp parts and accessories\u003c\/a\u003e, browse the full range of \u003ca href=\"\/en-ch\/collections\/handguards\"\u003ehandguards\u003c\/a\u003e, or shop every \u003ca href=\"\/en-ch\/collections\/honda-motorcycle-parts-accessories\"\u003eHonda motorcycle accessory\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality check:\u003c\/strong\u003e every part is inspected before shipping, and our team can help you confirm fitment for your exact model and year before you order.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eAll orders ship free, and every set of handguards is backed by a 1-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"2023-2024","offer_id":58887305527677,"sku":null,"price":89.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/rn-image_picker_lib_temp_bc074861-1435-473e-a760-91759046f31e.jpg?v=1791947390"},{"product_id":"crash-bar-bags-for-honda-xl750-transalp-2023-to-2024","title":"Crash Bar Bags For Honda XL750 Transalp - 2023 to 2024","description":"\u003cdiv class=\"pd pd--lean\"\u003e\n\u003ch2\u003eHandy Storage On The Transalp Crash Bars\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003ecrash bar bags\u003c\/strong\u003e are made for the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e from 2023 to 2024 and come as a \u003cstrong\u003epair\u003c\/strong\u003e, one for each side of the bike.\u003c\/p\u003e\n\u003cp\u003eThe seller states they fit \u003cstrong\u003eonly the original crash bars\u003c\/strong\u003e. They are cut from \u003cstrong\u003eCordura fabric\u003c\/strong\u003e with a \u003cstrong\u003ewaterproof inner coating\u003c\/strong\u003e and white piping around the edges, the same fabric family used in riding gear and expedition equipment.\u003c\/p\u003e\n\u003ch3\u003eWhy it is worth fitting\u003c\/h3\u003e\n\u003cp\u003eThe space inside the \u003cstrong\u003ecrash bars\u003c\/strong\u003e is often wasted. These bags turn it into \u003cstrong\u003equick-access storage\u003c\/strong\u003e for a \u003cstrong\u003etire repair kit\u003c\/strong\u003e, gloves, sunglasses or documents.\u003c\/p\u003e\n\u003cp\u003eThe fabric is protected by a \u003cstrong\u003eTeflon coating\u003c\/strong\u003e against moisture, dirt, oil and fading, and the \u003cstrong\u003ezippers\u003c\/strong\u003e are described as \u003cstrong\u003ewaterproof\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eA soft \u003cstrong\u003enon-slip base\u003c\/strong\u003e sits against the bike to prevent \u003cstrong\u003epaint damage\u003c\/strong\u003e, and the bags are \u003cstrong\u003ewashable\u003c\/strong\u003e when the trail gets muddy.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eEach bag fits over the \u003cstrong\u003eoriginal crash bar\u003c\/strong\u003e and closes with \u003cstrong\u003eVelcro fasteners\u003c\/strong\u003e, so the job needs no \u003cstrong\u003etools\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003ePull each strap \u003cstrong\u003etight\u003c\/strong\u003e around the bar, then check that nothing touches the \u003cstrong\u003efront wheel\u003c\/strong\u003e, the \u003cstrong\u003eradiator\u003c\/strong\u003e or your boots on the pegs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e one \u003cstrong\u003eleft bag\u003c\/strong\u003e and one \u003cstrong\u003eright bag\u003c\/strong\u003e. The seller does not list installation instructions.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable class=\"pd-fitment\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eXL750 Transalp (original crash bars only)\u003c\/td\u003e\n\u003ctd\u003e2023-2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFitment is listed exactly as stated by the manufacturer. Check your \u003cstrong\u003emodel\u003c\/strong\u003e, \u003cstrong\u003eyear\u003c\/strong\u003e and \u003cstrong\u003etrim\u003c\/strong\u003e against the table before ordering, and contact us with a photo if you have any doubt. Sold as a \u003cstrong\u003epair\u003c\/strong\u003e (left and right).\u003c\/p\u003e\n\u003cp\u003eExplore all our \u003ca href=\"\/en-ch\/collections\/honda-xl750-transalp-parts-accessories\"\u003eHonda XL750 Transalp parts and accessories\u003c\/a\u003e, browse the full range of \u003ca href=\"\/en-ch\/collections\/motorcycle-bags\"\u003emotorcycle bags\u003c\/a\u003e, or shop every \u003ca href=\"\/en-ch\/collections\/honda-motorcycle-parts-accessories\"\u003eHonda motorcycle accessory\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp class=\"pd-shipping\"\u003e\u003cstrong\u003eFree shipping + 1-year warranty.\u003c\/strong\u003e Every order of this crash bar bag set is covered.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":59003730985341,"sku":null,"price":79.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/S39c22e9c574a4529acf8c04352028c353.webp?v=1793263305"}],"url":"https:\/\/leananglemoto.com\/en-ch\/collections\/honda-xl750-transalp-parts-accessories.oembed","provider":"Lean Angle","version":"1.0","type":"link"}