{"product_id":"brake-caliper-cooling-ducts-for-yamaha-yzf-r6-r1-2004-to-2027","title":"Brake Caliper Cooling Ducts For Yamaha YZF-R125 R6 R1 MT-09 MT-10 MT-01 XSR 900 - 2004 to 2027","description":"\u003ch2\u003eBrake fade on track is caused by progressive heat buildup in the caliper body, brake fluid, and pad compound across repeated hard braking zones.\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eYamaha YZF-R6\u003c\/strong\u003e and \u003cstrong\u003eYZF-R1\u003c\/strong\u003e are among the most track-ridden production sportbikes in the world, while the \u003cstrong\u003eMT-09\u003c\/strong\u003e, \u003cstrong\u003eMT-10\u003c\/strong\u003e, and \u003cstrong\u003eXSR900\u003c\/strong\u003e are increasingly common on track days and in aggressive sport riding environments. All of these bikes ship with capable front braking systems, but caliper temperatures build lap by lap during sustained sessions. These \u003cstrong\u003ebrake caliper cooling ducts\u003c\/strong\u003e route ambient airflow from the front end directly onto the caliper body and rotor hat area, lowering operating temperature and extending the number of hard stops before fade onset becomes noticeable.\u003c\/p\u003e\n\u003cp\u003eEach duct set consists of two angled aluminum tubes with flexible heat-resistant hose connecting the airflow inlet to a bracket mounted on the lower fork leg. The ducts clamp to the fork tubes using the supplied brackets with no permanent modification to the fork, fairing, or caliper required. Available in four anodized finishes: \u003cstrong\u003eBlack\u003c\/strong\u003e, \u003cstrong\u003eGold\u003c\/strong\u003e, \u003cstrong\u003eSilver\u003c\/strong\u003e, and \u003cstrong\u003eRed\u003c\/strong\u003e. The bracket geometry accommodates the 41mm to 43mm inverted fork tubes used across the \u003cstrong\u003eYZF-R125\u003c\/strong\u003e, \u003cstrong\u003eR6\u003c\/strong\u003e, \u003cstrong\u003eR1\u003c\/strong\u003e, \u003cstrong\u003eMT-09\u003c\/strong\u003e, \u003cstrong\u003eMT-10\u003c\/strong\u003e, \u003cstrong\u003eMT-01\u003c\/strong\u003e, and \u003cstrong\u003eXSR900\u003c\/strong\u003e production range, covering all platforms with the same hardware.\u003c\/p\u003e\n\u003cp\u003eAt \u003cstrong\u003e$59.90\u003c\/strong\u003e, this is an accessible upgrade for \u003cstrong\u003eYamaha\u003c\/strong\u003e owners who use their bikes on track days or in sport riding environments where sustained braking generates significant heat. The R6 and R1 benefit most during track sessions where brake zones are repeated at speed every lap. The MT-09, MT-10, and XSR900 benefit during aggressive road riding and track days where the naked bike configuration and upright seating position lead to later, harder braking than on a faired sportbike.\u003c\/p\u003e\n\u003cp\u003eConfirmed fitment: \u003cstrong\u003eYamaha YZF-R125\u003c\/strong\u003e (2008 to 2027), \u003cstrong\u003eYZF-R6\u003c\/strong\u003e (2004 to 2020), \u003cstrong\u003eYZF-R1\u003c\/strong\u003e (2004 to 2027), \u003cstrong\u003eMT-09\u003c\/strong\u003e \/ Tracer 900 (2014 to 2027), \u003cstrong\u003eMT-10\u003c\/strong\u003e (2016 to 2027), \u003cstrong\u003eMT-01\u003c\/strong\u003e (2004 to 2012), and \u003cstrong\u003eXSR900\u003c\/strong\u003e (2016 to 2027). Verify fork leg diameter and caliper clearance if running non-stock brakes.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo they make a noticeable difference on the street?\u003c\/h3\u003e\n\u003cp\u003eOn the street with normal riding patterns, brakes rarely reach temperatures where cooling ducts produce a measurable change in feel. The benefit is most apparent on track, where braking zones repeat at speed every lap for 20 to 30 minute sessions. \u003cstrong\u003eMT-09\u003c\/strong\u003e and \u003cstrong\u003eXSR900\u003c\/strong\u003e owners who run canyon routes with sustained downhill braking may see a mild benefit. For pure street use, the ducts are primarily a visual performance addition.\u003c\/p\u003e\n\u003ch3\u003eDo they fit over aftermarket radial calipers?\u003c\/h3\u003e\n\u003cp\u003eThe duct outlet directs airflow toward the caliper and rotor area from a bracket on the lower fork leg - it does not mount to the caliper body itself. Most aftermarket configurations, including radial-mount Brembo Monobloc and Nissin units commonly fitted to the \u003cstrong\u003eR6\u003c\/strong\u003e and \u003cstrong\u003eR1\u003c\/strong\u003e, remain compatible as long as the fork leg diameter falls within the standard range. Oversized aftermarket calipers with a body that extends significantly beyond the OEM envelope may require bracket position adjustment.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Glossy Black","offer_id":58780123955581,"sku":null,"price":59.9,"currency_code":"USD","in_stock":true},{"title":"Matte Black","offer_id":58780123988349,"sku":null,"price":59.9,"currency_code":"USD","in_stock":false},{"title":"Carbon Look","offer_id":58780124021117,"sku":null,"price":69.9,"currency_code":"USD","in_stock":false},{"title":"Forged Carbon Replica","offer_id":58780124053885,"sku":null,"price":69.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/28_d562a0dd-3651-4db4-bbad-4a289f7776bd.webp?v=1790584538","url":"https:\/\/leananglemoto.com\/products\/brake-caliper-cooling-ducts-for-yamaha-yzf-r6-r1-2004-to-2027","provider":"Lean Angle","version":"1.0","type":"link"}