{"product_id":"engine-cover-for-triumph-street-twin-speed-twin-2016","title":"Engine Cover For Triumph Street Twin Speed Twin - 2016+","description":"\u003ch2\u003e\n\u003cstrong\u003eEngine Cover\u003c\/strong\u003e for \u003cstrong\u003eTriumph Street Twin\u003c\/strong\u003e and Speed Twin (2016 to present)\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTriumph Street Twin\u003c\/strong\u003e and \u003cstrong\u003eSpeed Twin\u003c\/strong\u003e expose their parallel twin engine as a visual focal point of the bike's design. The engine cases, clutch cover, and alternator cover are visible and unprotected in the stock configuration. On bikes used in urban commuting, a low-speed fall or parking contact puts these aluminum casings in direct contact with asphalt or a curb — resulting in scuffs, gouges, or cracks that compromise the visual character of the engine and, in the case of the clutch cover, risk oil contamination. This \u003cstrong\u003eengine cover\u003c\/strong\u003e is a protective overlay that mounts over the factory engine side covers, shielding the aluminum from direct impact and wear.\u003c\/p\u003e\n\n\u003cp\u003eThe cover is manufactured from \u003cstrong\u003eABS plastic with a matte or textured black finish\u003c\/strong\u003e. It attaches using the factory engine cover bolt positions on the Street Twin and Speed Twin, with no modifications to the engine casings themselves. The cover's profile follows the factory cover contour closely, maintaining the bike's clean side profile. Installation is straightforward — remove the stock cover bolts, position the protective overlay, and replace the bolts through the cover's bolt holes. Access to the clutch inspection plug is maintained through a port in the overlay design.\u003c\/p\u003e\n\n\u003cp\u003eAt \u003cstrong\u003e$69.90\u003c\/strong\u003e, this engine cover is practical protection for \u003cstrong\u003eStreet Twin\u003c\/strong\u003e and \u003cstrong\u003eSpeed Twin\u003c\/strong\u003e owners who use their bikes in city traffic. Urban motorcycles are significantly more likely to sustain low-speed falls than bikes ridden exclusively on open roads. The cover prevents the cosmetic and functional damage that makes a light fall more expensive than it needs to be. It also provides a subtle visual update to the engine side, giving the exposed engine bay a more modern protected appearance.\u003c\/p\u003e\n\n\u003cp\u003eConfirmed fitment for the \u003cstrong\u003eTriumph Street Twin\u003c\/strong\u003e (865cc and 900cc, 2016 onwards) and the \u003cstrong\u003eSpeed Twin\u003c\/strong\u003e (1200cc, 2019 onwards). Both models use compatible engine cover bolt positions and casing geometry. Also fits the \u003cstrong\u003eBonneville Bobber\u003c\/strong\u003e and \u003cstrong\u003eT120\u003c\/strong\u003e where the engine covers share the same mounting pattern.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eDoes it affect engine heat dissipation?\u003c\/h3\u003e\n\u003cp\u003eThe engine side covers are cast aluminum and contribute some surface area to engine cooling by convection. The overlay adds a thin ABS layer over this surface, which has minimal effect on total heat dissipation. The Street Twin and Speed Twin engines are designed with thermal margins that account for more significant obstruction than a thin cover overlay. No overheating concerns have been reported with similar covers on these platforms.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it work on the Street Scrambler?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eStreet Scrambler\u003c\/strong\u003e shares the Street Twin's 900cc engine block and uses the same clutch cover and alternator cover bolt pattern. The overlay fits the Street Scrambler using the same installation procedure as the Street Twin. Not confirmed for the \u003cstrong\u003eThruxton\u003c\/strong\u003e or \u003cstrong\u003eThruxton R\u003c\/strong\u003e, which use a different engine case aesthetic with a more rounded clutch cover profile.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58777876529533,"sku":null,"price":69.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_2ebaae7a-0293-4157-9621-5d0c46c68971.webp?v=1790586975","url":"https:\/\/leananglemoto.com\/products\/engine-cover-for-triumph-street-twin-speed-twin-2016","provider":"Lean Angle","version":"1.0","type":"link"}