{"product_id":"engine-guard-for-triumph-trident-660-tiger-sport-660-2021-2022","title":"Engine Guard For Triumph Trident 660 Tiger Sport 660 - 2021 to 2022","description":"\u003ch2\u003e\n\u003cstrong\u003eEngine Guard\u003c\/strong\u003e for \u003cstrong\u003eTriumph Trident 660\u003c\/strong\u003e and Tiger Sport 660 (2021 to 2022)\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTriumph Trident 660\u003c\/strong\u003e and \u003cstrong\u003eTiger Sport 660\u003c\/strong\u003e share the same inline triple engine architecture and a similar lower frame geometry. Both bikes are used in environments where low-speed falls and parking incidents are more common than high-speed crashes: urban commuting, weekend sport routes, and early-season riding on unfamiliar roads. In a low-side fall, the engine casings, alternator cover, and water pump housing on the left side are the first components to contact asphalt. This \u003cstrong\u003eengine guard\u003c\/strong\u003e is a dual-side crash bar set that mounts to the main frame using the engine bracket bolt positions, providing a protective steel buffer at the vulnerable engine contact points.\u003c\/p\u003e\n\n\u003cp\u003eThe guard set uses \u003cstrong\u003esteel tubing with a powder-coated black finish\u003c\/strong\u003e and precision-machined aluminum mounting brackets. The tubing diameter provides sufficient rigidity to absorb slide force without deforming against the engine. The bar geometry is shaped to the Trident 660 and Tiger Sport 660 lower frame profile, with adequate clearance for the exhaust system and lower bodywork panels on both models. The mounting system reuses the factory engine bracket hardware — no modifications to the frame or engine are required. Installation takes approximately one to two hours with basic socket tools. A full dual-side kit is included.\u003c\/p\u003e\n\n\u003cp\u003eAt \u003cstrong\u003e$149.90\u003c\/strong\u003e, this is the most comprehensive engine protection available for the \u003cstrong\u003eTrident 660\u003c\/strong\u003e and \u003cstrong\u003eTiger Sport 660\u003c\/strong\u003e platform. The kit covers both left and right engine sides, providing complete low-side protection regardless of which direction a fall occurs. Several verified buyers have reported using the guard as a first-response platform after urban drops, with the guard successfully absorbing impact and leaving the engine casings undamaged.\u003c\/p\u003e\n\n\u003cp\u003eConfirmed fitment for the \u003cstrong\u003eTriumph Trident 660\u003c\/strong\u003e (2021 to 2022) and \u003cstrong\u003eTiger Sport 660\u003c\/strong\u003e (2022 to present). Both bikes use the same 660cc inline triple engine and compatible lower frame mounting geometry. The guard mounts to the same frame positions on both platforms. Verify your exhaust routing if running an aftermarket full system before final assembly.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eDoes this guard fit both the Trident 660 and the Tiger Sport 660?\u003c\/h3\u003e\n\u003cp\u003eYes. The \u003cstrong\u003eTrident 660\u003c\/strong\u003e and \u003cstrong\u003eTiger Sport 660\u003c\/strong\u003e share the same 660cc engine block and lower frame mounting architecture. The engine guard mounts to the same bracket positions on both platforms using the same hardware. No adapter plates or additional parts are required for either model.\u003c\/p\u003e\n\n\u003ch3\u003eCan it be installed without removing the exhaust?\u003c\/h3\u003e\n\u003cp\u003eOn most installations, the guard can be fitted without a full exhaust removal. The mounting brackets access the engine mount bolts from the front and sides of the engine, which are clear of the exhaust header routing on the stock system. If your bike has an aftermarket mid-pipe or heat shield configuration that routes differently from OEM, check clearance at the bracket positions before beginning the installation.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58777862865277,"sku":null,"price":149.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_420daff8-27c1-4743-812b-bbc0e01ebbd1.webp?v=1790586716","url":"https:\/\/leananglemoto.com\/products\/engine-guard-for-triumph-trident-660-tiger-sport-660-2021-2022","provider":"Lean Angle","version":"1.0","type":"link"}