{"product_id":"headlight-protector-for-triumph-tiger-900-2020-2025","title":"Headlight Protector Guard For Triumph Tiger 900 GT Rally - 2020 to 2025","description":"\u003ch2\u003e\n\u003cstrong\u003eHeadlight Protector Guard\u003c\/strong\u003e for \u003cstrong\u003eTriumph Tiger 900\u003c\/strong\u003e, Tiger 900 GT, Tiger 900 Rally, and Tiger 900 Rally Pro (2020 to 2025)\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTriumph Tiger 900\u003c\/strong\u003e uses a distinctive twin-LED headlight assembly that sits high on the front beak, fully exposed in the adventure bike riding position. On trail riding, gravel tracks, and motorway use, the headlight lens takes direct exposure to stone chips and debris with no physical protection from the factory. A chip or crack to the outer lens requires replacement of the entire headlight unit — a disproportionately expensive repair for what is often a minor impact. This \u003cstrong\u003eheadlight protector guard\u003c\/strong\u003e mounts directly in front of the headlight lens on the Tiger 900, intercepting stones and debris before they reach the glass surface.\u003c\/p\u003e\n\n\u003cp\u003eThe guard is formed from \u003cstrong\u003estainless steel mesh\u003c\/strong\u003e or CNC-machined aluminum, set in a shaped mounting frame that follows the Tiger 900 headlight profile. It attaches to the existing headlight bracket mounting points on the beak fairing — no drilling required. The mesh aperture allows full headlight output for both low and high beam without measurable reduction in the beam pattern reach. The guard sits close to the lens surface without contact, leaving the headlight free to operate normally under all conditions including the Tiger 900's cornering light function where fitted.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTiger 900\u003c\/strong\u003e family spans three variants sharing the same headlight geometry: the road-biased \u003cstrong\u003eGT\u003c\/strong\u003e and \u003cstrong\u003eGT Pro\u003c\/strong\u003e, the mixed-surface \u003cstrong\u003eRally\u003c\/strong\u003e and \u003cstrong\u003eRally Pro\u003c\/strong\u003e, and the base Tiger 900. All three use the same twin-LED headlight housing and beak mounting position, making one guard compatible across the entire 2020 to 2025 range. The Rally Pro in particular, used on extended off-road sections where stone and gravel impact is frequent, benefits most from the protection.\u003c\/p\u003e\n\n\u003cp\u003eConfirmed fitment for the \u003cstrong\u003eTriumph Tiger 900\u003c\/strong\u003e, \u003cstrong\u003eTiger 900 GT\u003c\/strong\u003e, \u003cstrong\u003eTiger 900 GT Pro\u003c\/strong\u003e, \u003cstrong\u003eTiger 900 Rally\u003c\/strong\u003e, and \u003cstrong\u003eTiger 900 Rally Pro\u003c\/strong\u003e from 2020 to 2025. The headlight mounting architecture is consistent across all Tiger 900 variants and production years in this range.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eDoes it affect the headlight output or the cornering light function?\u003c\/h3\u003e\n\u003cp\u003eThe mesh aperture reduces total light output by approximately 10 to 15% compared to an unguarded lens. The reduction is not noticeable in normal use. The Tiger 900 GT Pro and Rally Pro cornering light function operates by adjusting the LED beam angle electronically — the guard does not interfere with this function as it mounts outside the lens and does not obstruct the internal light movement mechanism.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it fit the Tiger 900 GT Low variant?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eTiger 900 GT Low\u003c\/strong\u003e uses the same headlight housing and beak mounting geometry as the standard GT. The lowered seat height variant has no changes to the front end or headlight assembly that affect guard fitment. Installation on the GT Low follows the same procedure as all other Tiger 900 variants.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58781416227197,"sku":null,"price":69.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_ad39c7af-632b-4fb2-9e27-239dfce229bd.webp?v=1790619671","url":"https:\/\/leananglemoto.com\/products\/headlight-protector-for-triumph-tiger-900-2020-2025","provider":"Lean Angle","version":"1.0","type":"link"}