{"product_id":"horn-cover-protector-for-triumph-tiger-street-twin-2016","title":"Horn Cover Protector For Triumph Bonneville \/ Street Twin \/ Speed Triple \/ Tiger - 2016 to 2027","description":"\u003ch2\u003e\n\u003cstrong\u003eHorn Cover Protector\u003c\/strong\u003e for \u003cstrong\u003eTriumph Bonneville\u003c\/strong\u003e, Street Twin, Speed Triple, Tiger (2016 to 2027)\u003c\/h2\u003e\n\u003cp\u003eThe horn on Triumph's modern naked and roadster lineup sits at a consistent mounting position on the lower frame or fairing, shared across the \u003cstrong\u003eBonneville\u003c\/strong\u003e, \u003cstrong\u003eStreet Twin\u003c\/strong\u003e, \u003cstrong\u003eSpeed Triple\u003c\/strong\u003e, \u003cstrong\u003eTiger\u003c\/strong\u003e, and related platforms. This mounting location places the horn in the direct spray path of the front tire in wet conditions, and within the debris zone of the front wheel on gravel and mixed surfaces. This \u003cstrong\u003ehorn cover protector\u003c\/strong\u003e is a formed metal guard that mounts over the horn housing, shielding it from direct water, mud, and stone impact while allowing horn sound to project forward without restriction.\u003c\/p\u003e\n\u003cp\u003eThe cover is manufactured from \u003cstrong\u003ealuminum or steel alloy\u003c\/strong\u003e with a black anodized or powder-coated finish. It mounts using a two-bolt bracket that attaches to the factory horn mount positions — a direct bolt-on installation compatible across the Triumph lineup that uses the same horn mounting specification. The guard's face is perforated for sound transmission. Installation takes approximately fifteen minutes with a socket set. The part number and mount design cover a wide range of Triumph models, making this a useful stock accessory for shops servicing multiple Triumph platforms.\u003c\/p\u003e\n\u003cp\u003eAt \u003cstrong\u003e$29.90\u003c\/strong\u003e, this cover is an affordable preventive measure for \u003cstrong\u003eTriumph\u003c\/strong\u003e owners across the Bonneville, Street Twin, Speed Triple, Tiger, Thruxton, and Scrambler families. The horn is a safety-critical component — a failed horn must be replaced before legal road use. Protecting it from the most common causes of failure (moisture ingress and stone impact) for a minimal cost is a straightforward maintenance decision.\u003c\/p\u003e\n\u003cp\u003eConfirmed fitment for the following \u003cstrong\u003eTriumph\u003c\/strong\u003e models: \u003cstrong\u003eStreet Twin\u003c\/strong\u003e (2016+), \u003cstrong\u003eSpeed Twin\u003c\/strong\u003e (2019+), \u003cstrong\u003eSpeed Triple 1200 RS\u003c\/strong\u003e and \u003cstrong\u003eRR\u003c\/strong\u003e (2021+), \u003cstrong\u003eTiger 850\u003c\/strong\u003e, \u003cstrong\u003eTiger 900\u003c\/strong\u003e (2020+), \u003cstrong\u003eTiger Sport\u003c\/strong\u003e (2022+), \u003cstrong\u003eBonneville T100\u003c\/strong\u003e and \u003cstrong\u003eT120\u003c\/strong\u003e (2016+). All listed models use the same horn mount position and bolt pattern.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes it fit the Triumph Street Scrambler?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eStreet Scrambler\u003c\/strong\u003e uses the same horn mount specification as the Street Twin and Bonneville T100 platforms. Fitment is confirmed for the Street Scrambler from 2017 onwards. The horn position on the Scrambler is exposed to additional off-road spray and grit, making the cover particularly useful for riders who take the Scrambler on mixed-surface routes.\u003c\/p\u003e\n\u003ch3\u003eIs this the same as the OEM Triumph horn protector?\u003c\/h3\u003e\n\u003cp\u003eTriumph does not offer an OEM horn protector as a standard accessory. This aftermarket cover uses the same mounting points as the factory horn bracket and provides equivalent or better protection than a rubber grommet solution. The fit and finish is consistent with other aftermarket accessories in this price range and provides a purposeful functional and visual addition to the lower frame area.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58777870500221,"sku":null,"price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_38c9fb86-648f-4a4c-850c-3e841993f41d.webp?v=1790586867","url":"https:\/\/leananglemoto.com\/products\/horn-cover-protector-for-triumph-tiger-street-twin-2016","provider":"Lean Angle","version":"1.0","type":"link"}