{"product_id":"side-fairing-protector-for-honda-xl750-transalp-2024-2025","title":"Side Fairing Protector For Honda XL750 Transalp - 2024 to 2026","description":"\u003cp\u003eThis \u003cstrong\u003eside fairing protector\u003c\/strong\u003e is a set of formed ABS or TPU panels that attach directly to the side fairing sections of the \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e and protect the painted surfaces from the contact marks, scuffs, and scratches that accumulate during normal use of an adventure motorcycle. The protectors are cut and shaped to match the \u003cstrong\u003eTransalp\u003c\/strong\u003e's fairing geometry precisely, sitting against the surfaces most exposed to routine contact without altering the profile of the bodywork.\u003c\/p\u003e\n\u003cp\u003eThe side fairings on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e are among the most contact-exposed body panels on the bike. The rider's right leg passes the right fairing panel on every mount and dismount, generating boot and trouser contact at the same point each time, while luggage bags and tank bags press against the side panels during loading and flex against them during riding. General handling — pushing the bike in confined spaces, or leaning it on the side stand on uneven ground — produces repeated contact at the lower fairing edges. Without protection, these contact zones develop permanent scuff marks in the ABS surface that no amount of polishing will remove.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_8feff155-383b-4db2-beda-572a9b9f6a74.jpg?v=1790378924\" alt=\"Side Fairing Protector Honda XL750 Transalp\" style=\"max-width: 100%; height: auto; border-radius: 4px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Fairing Scratches Are Permanent\u003c\/h2\u003e\n\u003cp\u003eABS plastic fairings are molded and painted as a composite surface, with color carried in a paint layer over the base material. Surface scratches that break through the clear coat and into the color coat cannot be polished out without removing paint from the surrounding area, and a scratch only a few millimeters wide is visible across a parking lot on a dark-colored panel. The \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e's side fairings are prominent enough that surface condition is immediately noticeable whenever the bike is clean.\u003c\/p\u003e\n\u003cp\u003eThe alternative to fitting a protector is to accept the gradual accumulation of contact marks across the fairing surface, or to have the panels resprayed — a cost that exceeds the price of a protector set many times over. \u003cstrong\u003eA fairing protector fitted before the first contact occurs means the contact marks go onto the protector rather than the paint\u003c\/strong\u003e, and the protector can be replaced if it becomes too scuffed, while the original fairing underneath remains in the same condition as the day the bike was new.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eMaterial and Fit\u003c\/h2\u003e\n\u003cp\u003eThe protectors are manufactured from \u003cstrong\u003eABS or TPU plastic\u003c\/strong\u003e in a black finish that sits against the fairing surface without drawing attention to itself. Both materials are flexible enough to conform to the curved fairing sections without cracking under the load of repeated contact, and UV-stable enough to maintain their color in outdoor conditions without fading or chalking over time.\u003c\/p\u003e\n\u003cp\u003eThe panels are cut to match the specific geometry of the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e's side fairing sections for the 2024 and 2025 model years, which means they align with the fairing surface correctly and do not stand proud of the surrounding bodywork in a way that catches clothing or luggage straps. A protector that does not fit the fairing profile correctly will peel at the edges prematurely and will not provide even coverage across the contact zone. \u003cstrong\u003eThe model-specific cut is what separates a purpose-made protector from a trimmed universal strip\u003c\/strong\u003e, and it is the reason the panels sit flat and stay in place through extended touring use.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation — \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e 2024–2025\u003c\/h2\u003e\n\u003cp\u003eThe protectors attach to the fairing surface using self-adhesive backing. Installation requires cleaning the fairing surface thoroughly with isopropyl alcohol to remove wax, polish, and road film, allowing the surface to dry completely, then peeling the backing and pressing each panel firmly into position from one edge across to the other to avoid trapping air. The adhesive reaches full bond strength within 24 hours, and the protectors should not be subjected to heavy contact or water during that curing period.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation requires no tools and takes approximately 10–15 minutes for the full set.\u003c\/strong\u003e The panels are removable by warming the adhesive with a heat gun on a low setting and peeling slowly from one corner, and the fairing surface beneath is unaffected provided the paint was in sound condition before the protector was applied. These protectors are listed for all \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e variants produced in the 2024 and 2025 model years.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/04_05ee42bb-1e99-4901-bb22-995f967dd19e.webp?v=1790378810\" alt=\"Side Fairing Protector Honda XL750 Transalp\" style=\"max-width: 100%; height: auto; border-radius: 4px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill the protector be visible against the fairing?\u003c\/h3\u003e\n\u003cp\u003eThe black finish of the protector panels matches the darker areas of the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e's color palette and is designed to be as unobtrusive as possible once fitted. On black or dark-colored fairings the protectors are barely visible and sit cleanly against the surface. On lighter fairing colors the contrast between the protector panel and the surrounding fairing will be more noticeable, which is a trade-off between protection and appearance that each buyer should weigh against their own priorities before ordering.\u003c\/p\u003e\n\u003ch3\u003eDo the protectors fit the 2023 model year Transalp 750 as well?\u003c\/h3\u003e\n\u003cp\u003eThese protectors are listed for the 2024 and 2025 \u003cstrong\u003eHonda XL750 Transalp\u003c\/strong\u003e. Honda updated the side fairing design on the \u003cstrong\u003eXL750 Transalp\u003c\/strong\u003e for the 2024 model year, and the side panel contours on the 2024–2025 version differ from those on the 2023 model. Buyers with a 2023 \u003cstrong\u003eTransalp 750\u003c\/strong\u003e should verify the panel dimensions against their fairing before ordering, as the 2023 fairing profile may not match the cut of these protectors and an incorrect fit will result in edge lifting.\u003c\/p\u003e\n\u003ch3\u003eWhat happens to the fairing if the protector is removed?\u003c\/h3\u003e\n\u003cp\u003eQuality adhesive-backed protectors removed correctly leave the fairing surface clean and undamaged. The adhesive is formulated to bond firmly enough to prevent the panel from lifting at the edges during use, while still releasing cleanly from sound paintwork when the panel is warmed and peeled slowly from one corner. Any adhesive residue that remains on the fairing after removal can be cleaned away with isopropyl alcohol without affecting the paint finish beneath.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58754067399037,"sku":null,"price":89.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_8feff155-383b-4db2-beda-572a9b9f6a74.jpg?v=1790378924","url":"https:\/\/leananglemoto.com\/products\/side-fairing-protector-for-honda-xl750-transalp-2024-2025","provider":"Lean Angle","version":"1.0","type":"link"}