{"product_id":"side-panel-infill-kit-for-yamaha-tracer-9-gt-2021-2025","title":"Side Panel Infill Kit For Yamaha Tracer 9 GT - 2021 to 2025","description":"\u003ch2\u003e\n\u003cstrong\u003eSide Panel Infill Kit\u003c\/strong\u003e for \u003cstrong\u003eYamaha Tracer 9\u003c\/strong\u003e and Tracer 9 GT (2021 to 2025)\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eYamaha Tracer 9\u003c\/strong\u003e and \u003cstrong\u003eTracer 9 GT\u003c\/strong\u003e were introduced for 2021 as a significant rework of the Tracer 900 platform, bringing sharper styling and a more complete touring equipment package. The side panel area between the fairing and the frame on the Tracer 9 has open sections that are visible from the side and front — gaps between the bodywork panels that expose frame tubes and wiring runs. This \u003cstrong\u003eside panel infill kit\u003c\/strong\u003e fills these open sections with shaped ABS panels that create a cleaner, more finished appearance across the mid-section of the bike, closing off the visual gaps without adding significant weight or bulk.\u003c\/p\u003e\n\n\u003cp\u003eThe kit consists of left and right infill panels manufactured from \u003cstrong\u003eABS plastic\u003c\/strong\u003e, shaped to the specific geometry of the Tracer 9 frame section openings. They attach using push-clip or bolt-on mounts to the existing fairing bracket positions — no drilling, no modification to the frame or existing bodywork. The panels sit flush with the surrounding fairing surfaces, eliminating the shadow gaps that draw the eye on the stock bike. The finish matches the surrounding fairing panels in gloss black or the available color options, maintaining the visual continuity of the Tracer 9's bodywork system.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTracer 9 GT\u003c\/strong\u003e adds a quickshifter, semi-active suspension, and a larger windscreen over the base Tracer 9, but the frame and side panel architecture is identical between the two variants. The infill kit fits both the standard Tracer 9 and the GT with the same hardware and installation procedure. The kit also fits the \u003cstrong\u003eTracer 9 GT+\u003c\/strong\u003e where this variant was offered, as the side panel geometry remained unchanged across all Tracer 9 variants throughout the 2021 to 2025 production run.\u003c\/p\u003e\n\n\u003cp\u003eConfirmed fitment for the \u003cstrong\u003eYamaha Tracer 9\u003c\/strong\u003e and \u003cstrong\u003eTracer 9 GT\u003c\/strong\u003e from 2021 to 2025. The Tracer 9 platform uses the same CP3 engine and frame architecture as the MT-09 from this generation — verify that your specific model year has not received a mid-cycle fairing revision if ordering for a 2025 model year bike.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eDoes it fit the Tracer 900 (pre-2021)?\u003c\/h3\u003e\n\u003cp\u003eNo. The pre-2021 \u003cstrong\u003eTracer 900\u003c\/strong\u003e and \u003cstrong\u003eTracer 900 GT\u003c\/strong\u003e use a different fairing architecture with different side panel geometry and bracket positions. The 2021 Tracer 9 was a comprehensive redesign with a new frame and bodywork system. The infill kit is sized and shaped for the 2021 and later Tracer 9 platform only and will not fit the previous generation without significant modification.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it interfere with the Tracer 9 GT's semi-active suspension controls or wiring?\u003c\/h3\u003e\n\u003cp\u003eThe infill panels fill the visible gaps in the outer fairing section and do not reach into the frame interior where the suspension control wiring and ECU connections are routed. Installation and removal of the panels does not require disconnecting any wiring. Service access to the frame-side components on the Tracer 9 GT is maintained by removing the panels the same way the standard fairing panels are removed — push-clip release followed by panel removal.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58781500375421,"sku":null,"price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/01_62d62b7f-ef47-4208-82e1-f45e444c4d59.webp?v=1790621069","url":"https:\/\/leananglemoto.com\/products\/side-panel-infill-kit-for-yamaha-tracer-9-gt-2021-2025","provider":"Lean Angle","version":"1.0","type":"link"}