{"product_id":"windscreen-support-bracket-for-yamaha-tenere-700-2019-2024","title":"Windscreen Extension Bracket For Yamaha Tenere 700 - 2019 to 2024","description":"\u003ch2\u003e\n\u003cstrong\u003eWindscreen Support Bracket\u003c\/strong\u003e for \u003cstrong\u003eYamaha Tenere 700\u003c\/strong\u003e (2019 to 2024)\u003c\/h2\u003e\n\n\u003cp\u003eThe stock windscreen on the \u003cstrong\u003eYamaha Tenere 700\u003c\/strong\u003e is set at a fixed height designed around the average rider. Taller riders often find it sits below eye level, which means looking directly through the turbulent air coming off the top edge rather than above it or through a clean section of screen. This \u003cstrong\u003ewindscreen support bracket\u003c\/strong\u003e is an aluminum riser that raises the existing screen height by a fixed amount, moving the effective top edge upward to better suit taller riders or those who want reduced turbulence at the helmet level.\u003c\/p\u003e\n\n\u003cp\u003eThe bracket is machined from \u003cstrong\u003eCNC aluminum\u003c\/strong\u003e and available in black anodized and silver finishes. Both are corrosion-resistant and suited to the \u003cstrong\u003eTenere 700\u003c\/strong\u003e's off-road usage conditions. The bracket replaces the stock screen mounting hardware and uses the same bolt pattern, which means no modification to the fairing or screen is required. The screen itself is retained as-is.\u003c\/p\u003e\n\n\u003cp\u003eAt \u003cstrong\u003e$39.90\u003c\/strong\u003e, this bracket represents a practical, low-cost way to improve windscreen performance without replacing the screen itself. The improvement is positional rather than physical — the screen is unchanged, but raising it three to four centimeters can move the turbulent zone from helmet level to above the rider's head on a typical seating position.\u003c\/p\u003e\n\n\u003cp\u003eConfirmed fitment for the \u003cstrong\u003eYamaha Tenere 700\u003c\/strong\u003e and \u003cstrong\u003eT7\u003c\/strong\u003e from 2019 through 2024. The XTZ700 and Tenere 700 World Raid both use the same windscreen mounting geometry and are compatible.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eHow much does it raise the screen?\u003c\/h3\u003e\n\u003cp\u003eThe bracket raises the \u003cstrong\u003ewindscreen\u003c\/strong\u003e by approximately 3 to 4 cm depending on the specific variant. This is enough to shift the top edge from chin to forehead height on a 5'10\" rider in the standard seated position. Riders above 6'0\" may find it brings the screen edge closer to the ideal sight line but may still prefer an aftermarket taller screen for full clearance.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it affect screen rigidity or vibration?\u003c\/h3\u003e\n\u003cp\u003eRaising a screen increases its effective lever arm from the mounting points, which can increase vibration at certain speeds depending on screen thickness. The \u003cstrong\u003eTenere 700\u003c\/strong\u003e's stock screen is reasonably thick and typically remains stable with this bracket. If your screen vibrates at a specific speed range, adding a rubber washer between the screen and bracket helps dampen any resonance.\u003c\/p\u003e","brand":"Morrison","offers":[{"title":"Default Title","offer_id":58775937483133,"sku":null,"price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/0783\/2445\/files\/30_43496911-f5be-46eb-84a5-459f197a6918.webp?v=1790531582","url":"https:\/\/leananglemoto.com\/products\/windscreen-support-bracket-for-yamaha-tenere-700-2019-2024","provider":"Lean Angle","version":"1.0","type":"link"}