Carbon Fiber Rear Fender For Yamaha MT-09 FZ-09 - 2014 to 2020

Carbon Fiber Rear Fender for Yamaha MT-09 (2014 to 2020)

The Yamaha MT-09 is one of the defining naked bikes of its generation — a lightweight, torquey CP3 triple that rewards aggressive riding with a raw, direct character. The stock rear fender is functional injection-molded plastic that does its job without contributing anything to the visual identity of the bike. Replacing it with a carbon fiber rear fender is one of the cleanest single-part upgrades available for the MT-09: it removes visual bulk from the tail section, reduces unsprung weight at the rear wheel, and adds the textured carbon weave pattern that suits the MT-09's dark, mechanical aesthetic.

The fender is manufactured from genuine carbon fiber composite using a vacuum-formed layup process. The outer surface shows a consistent 3K plain or twill weave under a UV-resistant clear coat that protects the carbon finish from yellowing and surface degradation over time. The mounting points replicate the OEM fender bracket positions on the MT-09 swingarm — a direct bolt-on replacement that uses the factory hardware with no modification to the subframe or swingarm. The carbon construction reduces the fender weight compared to the stock plastic unit while providing equivalent or better stiffness against road spray deflection.

The tail section of the first and second generation MT-09 (2014 to 2020) has a short, aggressive silhouette that the carbon fender complements directly. The absence of the stock fender's thicker plastic profile makes the rear wheel and tire more visually prominent — a desirable change on a bike where the wheel and brake hardware are part of the visual composition. Several verified buyers have noted the improvement in the tail's perceived proportions after the swap.

Confirmed fitment for the Yamaha MT-09 and FZ-09 from 2014 to 2020, covering the original generation (2014 to 2016) and the updated generation (2017 to 2020). Both generations share the same rear swingarm fender mounting geometry. Also fits the MT-09 Tracer base model where the rear subframe fender position is retained. Not confirmed for the 2021 and later MT-09, which introduced a revised tail and swingarm design.

Frequently Asked Questions

Is the carbon fiber genuine or a carbon-look ABS plastic?

This is genuine carbon fiber composite — not a carbon-look plastic or vinyl overlay. The part is laid up from carbon fiber fabric and resin, vacuum-formed for consistent fiber density, and finished with a structural clear coat. The weight saving compared to the OEM plastic fender is real. A carbon-look ABS fender would not achieve the weight reduction or the structural properties of a genuine composite part.

Does it fit the MT-09 SP?

The MT-09 SP (2018 to 2020) uses the same frame, swingarm, and rear fender mounting geometry as the standard MT-09. The SP designation adds Ohlins suspension and a different seat — no changes to the rear fender bracket position. The carbon fiber fender fits the MT-09 SP using the same installation procedure as the standard model.

Free shipping on every order in the US. Every part is covered by a 1-year warranty and can be returned within 30 days of receipt.