Carbon Fiber Side Covers For Yamaha MT-09 FZ-09 - 2014 to 2020

Carbon Fiber Side Covers for Yamaha MT-09 and FZ-09 (2014 to 2020)

The Yamaha MT-09 has one of the most visually distinctive naked bike profiles of its era, built around the exposed CP3 engine and the sharp angular bodywork introduced with the first generation. The stock side panels — the engine cover plates that frame the mid-section of the bike between the tank and the subframe — are injection-molded plastic finished in body color. Replacing them with carbon fiber side covers strips the color from this section and replaces it with the structural weave pattern of genuine carbon composite, reinforcing the MT-09's mechanical, stripped-back visual identity and reducing weight in the process.

The covers are manufactured from genuine carbon fiber composite with a vacuum-formed 3K weave layup and a UV-resistant clear coat finish. The carbon weave pattern is consistent across the visible surface without voids or misaligned sections. Each cover replicates the OEM side panel profile and mounts to the same bracket positions on the MT-09 frame using the factory fasteners — no additional mounting hardware, no modification to the frame or subframe. The fit is flush against the tank and subframe sections with the same gap tolerance as the original panels.

The weight saving over the OEM plastic panels is modest individually but contributes to an overall reduction in unsprung and bodywork mass. More significantly, the carbon finish changes the visual weight of the mid-section — the dark weave recedes visually compared to body-color panels, making the engine and frame the focal elements of the side profile. This suits the MT-09's design philosophy directly, where the engine is intended to be the visual centerpiece rather than the bodywork around it.

Confirmed fitment for the Yamaha MT-09 and FZ-09 from 2014 to 2020, covering the first generation (2014 to 2016) and the refreshed second generation (2017 to 2020). Both generations share the same side panel mounting geometry and bracket positions. Not confirmed for the 2021 and later MT-09, which introduced a fully revised chassis and bodywork architecture.

Frequently Asked Questions

Do these replace the tank side panels or the frame cover panels?

These replace the frame side cover panels — the panels that sit between the tank base and the rear subframe on each side of the bike, framing the engine mid-section. They do not replace the tank side panels, which are a separate part that attaches to the fuel tank itself. The frame cover panels are the primary visual surface on each side of the MT-09's midsection and have the most impact on the bike's side profile appearance.

Is the carbon finish compatible with other aftermarket carbon parts?

The 3K plain weave and clear coat specification used on these side covers is consistent with the standard carbon finish used across most aftermarket carbon bodywork for the MT-09 platform — tank pads, fender covers, and heel guards from the major aftermarket suppliers. The weave pattern and gloss level match well against standard aftermarket carbon parts in a full carbon build.

Free shipping on every order in the US. Every part is covered by a 1-year warranty and can be returned within 30 days of receipt.