Front Fender For Yamaha Tracer 9 Tracer 900 2015 2016 2017 2018 2019 2020 2021

The front fender on the Yamaha Tracer 900 takes a beating every single ride. It sits directly behind the front tire, catching every stone, piece of gravel, puddle of standing water, and patch of mud the wheel throws upward at speed. Over time, the OEM plastic cracks from repeated impacts, fades from UV exposure, and develops stress fractures around the mounting points from vibration. Once the fender is cracked or missing, there's nothing between the road surface and your fork seals, lower triple clamp, radiator, and frame rails. Road spray and debris hit those components directly, accelerating corrosion and wear on parts that are expensive to replace.

This replacement front fender for the Yamaha Tracer 9 and Tracer 900 restores full debris and water protection to the front end with OEM-spec fitment that matches the factory mounting points, tire clearance, and bodywork lines.

Why the Front Fender Matters More Than Most Riders Think

The front fender isn't just cosmetic. It's the first line of defense for some of the most sensitive components on the bike. Without it, or with a cracked fender that lets debris through, you're exposing the fork seals to direct stone impacts. A nicked fork seal leaks oil down the fork tube, contaminates the brake rotor, and requires a seal replacement that means pulling the forks apart. That repair costs significantly more than a replacement fender.

Water and grit sprayed directly onto the radiator core without a fender in the way cakes the fins with debris that blocks airflow and reduces cooling efficiency. The same spray reaches the lower frame rails, engine cases, and wiring harness connectors underneath the tank, accelerating corrosion in areas you don't see until something fails.

A clean, intact front fender keeps all of that where it belongs: behind the tire and off the bike.

Direct Fit for Yamaha Tracer 9 and Tracer 900 2015 to 2021

This front fender is engineered to match the OEM mounting points on the Yamaha Tracer 900 fork tubes and frame brackets. It bolts into the same positions as the factory fender with no drilling, no trimming, and no modification to the fork legs or bodywork. The tire clearance matches the stock specification, so there's no risk of contact between the fender and the tire under full suspension compression or during hard braking when the forks dive.

The fender profile follows the factory bodywork lines, blending with the Tracer's sport-touring styling rather than looking like a generic aftermarket part bolted on as an afterthought.

Construction and Finish

The fender is molded from high-impact ABS plastic, the same material class used in OEM motorcycle bodywork. ABS offers the right combination of rigidity, flexibility, and impact resistance for a component that absorbs constant vibration and occasional stone hits. It flexes on impact rather than shattering the way cheaper plastics do, and it holds its shape across temperature extremes from freezing winter commutes to hot summer highway rides.

The black finish is smooth and consistent, ready to run as-is or accept paint, vinyl wrap, or hydro-dip for a custom color match. The surface takes primer and paint well without sanding, so matching it to a non-black bike is straightforward.

Installation on Yamaha Tracer 9 Tracer 900

Installation is a straightforward bolt-on swap. Remove the existing fender by unbolting from the fork tubes and frame mounting points. Position the new fender, align the mounting holes with the OEM brackets, and secure using the provided hardware. Standard hand tools are all you need, and the job takes about 15 to 20 minutes.

No special alignment tools, no torque wrenches beyond what you'd use for basic fasteners, and no dealership visit required. If you can change your oil, you can swap the fender.

What's in the Box

The kit includes the front fender in black and all necessary mounting hardware and brackets for a complete installation.

Compatibility

Please double-check your model year and trim before ordering.

Your order ships free, and every fender is backed by a 1-year warranty against manufacturing defects.

Free shipping on every order in the US. Every part is covered by a 1-year warranty and can be returned within 30 days of receipt.