Headlight Protector Guard For Triumph Tiger 900 GT Rally - 2020 to 2025

Headlight Protector Guard for Triumph Tiger 900, Tiger 900 GT, Tiger 900 Rally, and Tiger 900 Rally Pro (2020 to 2025)

The Triumph Tiger 900 uses a distinctive twin-LED headlight assembly that sits high on the front beak, fully exposed in the adventure bike riding position. On trail riding, gravel tracks, and motorway use, the headlight lens takes direct exposure to stone chips and debris with no physical protection from the factory. A chip or crack to the outer lens requires replacement of the entire headlight unit — a disproportionately expensive repair for what is often a minor impact. This headlight protector guard mounts directly in front of the headlight lens on the Tiger 900, intercepting stones and debris before they reach the glass surface.

The guard is formed from stainless steel mesh or CNC-machined aluminum, set in a shaped mounting frame that follows the Tiger 900 headlight profile. It attaches to the existing headlight bracket mounting points on the beak fairing — no drilling required. The mesh aperture allows full headlight output for both low and high beam without measurable reduction in the beam pattern reach. The guard sits close to the lens surface without contact, leaving the headlight free to operate normally under all conditions including the Tiger 900's cornering light function where fitted.

The Tiger 900 family spans three variants sharing the same headlight geometry: the road-biased GT and GT Pro, the mixed-surface Rally and Rally Pro, and the base Tiger 900. All three use the same twin-LED headlight housing and beak mounting position, making one guard compatible across the entire 2020 to 2025 range. The Rally Pro in particular, used on extended off-road sections where stone and gravel impact is frequent, benefits most from the protection.

Confirmed fitment for the Triumph Tiger 900, Tiger 900 GT, Tiger 900 GT Pro, Tiger 900 Rally, and Tiger 900 Rally Pro from 2020 to 2025. The headlight mounting architecture is consistent across all Tiger 900 variants and production years in this range.

Frequently Asked Questions

Does it affect the headlight output or the cornering light function?

The mesh aperture reduces total light output by approximately 10 to 15% compared to an unguarded lens. The reduction is not noticeable in normal use. The Tiger 900 GT Pro and Rally Pro cornering light function operates by adjusting the LED beam angle electronically — the guard does not interfere with this function as it mounts outside the lens and does not obstruct the internal light movement mechanism.

Does it fit the Tiger 900 GT Low variant?

The Tiger 900 GT Low uses the same headlight housing and beak mounting geometry as the standard GT. The lowered seat height variant has no changes to the front end or headlight assembly that affect guard fitment. Installation on the GT Low follows the same procedure as all other Tiger 900 variants.

Free shipping on every order in the US. Every part is covered by a 1-year warranty and can be returned within 30 days of receipt.