Side Panel Infill Kit For Yamaha Tracer 9 GT - 2021 to 2025

Side Panel Infill Kit for Yamaha Tracer 9 and Tracer 9 GT (2021 to 2025)

The Yamaha Tracer 9 and Tracer 9 GT were introduced for 2021 as a significant rework of the Tracer 900 platform, bringing sharper styling and a more complete touring equipment package. The side panel area between the fairing and the frame on the Tracer 9 has open sections that are visible from the side and front — gaps between the bodywork panels that expose frame tubes and wiring runs. This side panel infill kit fills these open sections with shaped ABS panels that create a cleaner, more finished appearance across the mid-section of the bike, closing off the visual gaps without adding significant weight or bulk.

The kit consists of left and right infill panels manufactured from ABS plastic, shaped to the specific geometry of the Tracer 9 frame section openings. They attach using push-clip or bolt-on mounts to the existing fairing bracket positions — no drilling, no modification to the frame or existing bodywork. The panels sit flush with the surrounding fairing surfaces, eliminating the shadow gaps that draw the eye on the stock bike. The finish matches the surrounding fairing panels in gloss black or the available color options, maintaining the visual continuity of the Tracer 9's bodywork system.

The Tracer 9 GT adds a quickshifter, semi-active suspension, and a larger windscreen over the base Tracer 9, but the frame and side panel architecture is identical between the two variants. The infill kit fits both the standard Tracer 9 and the GT with the same hardware and installation procedure. The kit also fits the Tracer 9 GT+ where this variant was offered, as the side panel geometry remained unchanged across all Tracer 9 variants throughout the 2021 to 2025 production run.

Confirmed fitment for the Yamaha Tracer 9 and Tracer 9 GT from 2021 to 2025. The Tracer 9 platform uses the same CP3 engine and frame architecture as the MT-09 from this generation — verify that your specific model year has not received a mid-cycle fairing revision if ordering for a 2025 model year bike.

Frequently Asked Questions

Does it fit the Tracer 900 (pre-2021)?

No. The pre-2021 Tracer 900 and Tracer 900 GT use a different fairing architecture with different side panel geometry and bracket positions. The 2021 Tracer 9 was a comprehensive redesign with a new frame and bodywork system. The infill kit is sized and shaped for the 2021 and later Tracer 9 platform only and will not fit the previous generation without significant modification.

Does it interfere with the Tracer 9 GT's semi-active suspension controls or wiring?

The infill panels fill the visible gaps in the outer fairing section and do not reach into the frame interior where the suspension control wiring and ECU connections are routed. Installation and removal of the panels does not require disconnecting any wiring. Service access to the frame-side components on the Tracer 9 GT is maintained by removing the panels the same way the standard fairing panels are removed — push-clip release followed by panel removal.

Free shipping on every order in the US. Every part is covered by a 1-year warranty and can be returned within 30 days of receipt.